Oh I see, I guess what I am trying to do is save the height map once then reference it on startup so I do not have to probe every time because I have solid bed mounts and no z-probe at this time. I plan on adding the z-probe soon. Should I just run the G29 once and use the results instead of the 5 probe points generated from the configurator? Would I delete these G30 probe points from the bed.g file?
Thank you again
Also updated to firmware 2.02 with same issue...very strange
@phaedrux I updated to 1.22.4 and the issue still persists
; bed.g
; called to perform automatic bed compensation via G32
;
; generated by RepRapFirmware Configuration Tool on Wed Oct 31 2018 12:24:34 GMT-0400 (Eastern Daylight Time)
M561 ; clear any bed transform
G28 ; home all axes
; Probe the bed at 5 points
G30 P0 X15 Y15 H0 Z-99999
G30 P1 X15 Y220 H0 Z-99999
G30 P2 X220 Y220 H0 Z-99999
G30 P3 X220 Y15 H0 Z-99999
G30 P4 X117.5 Y117.5 H0 Z-99999 S
M374
or
M374 P"MyAlternateHeightMap.csv"
I've done either one of the M374 with the same issue.
Thanks
@phaedrux thank you I will give this a try tonight!
Thank you,
I am running 2.01 with web control 1.22.3 and server 1.21. All from latest stable release.
Re: Height Map Javascript Error
I am seeing the following message after running the auto bed compensation and the only way I am able to remove such error is to remove saving of the height map as the final line in bed.g file (M374) .
