Thank you @dc42
The manual bed levelling assistant is working smoothly now! Great stuff!
We are looking onto the possibility of implementing fully automated bed levelling using 5V servomotors. Is it possible to connect them to the original duet wifi board. If so, where should we connect them?
Thanks, good job
Hi @dc42!
I have been able to successfully autohome X, Y and Z using sensorless homing (I am working with a coreXY).
Currently I am experimenting with manual bed levelling assistant using StallGuard but I don't know how to correctly input StallGuard parameters into probing. My code is as shown below. Am I missing something?
config.g file
...
M671 X111:11:211 Y14.2:194:193 P0.7
...
M558 P10 X0 Y0 Z0
...
bed.g file
G28
M915 Z H200 S3 F0 R1
G30 P0 X111 Y14.2 Z-99999
G30 P1 X11 Y194 Z-99999
G30 P2 X211 Y193 Z-99999 S3
I have uploaded firmware 2.0 beta 2