the other idea would be G10
i say that i got my fixed z-max and a travel range from about 210mm. everething above i have to do with the tool offset.
i think tha ultimaker is doing the same but verry verry comfortable

i understand
a correct Z=0 level is everething i need.

I thought about G30, but how is it, when i home the axis, do i have to adjust it always, or will he save the value?
If he won´t save i have to adjust it every print, that wouldn´t be verry nice.

correct, only z-max

Hello,
since my ultimaker 2 mainboard broke down i´m trying to build my own "FW" for the duet.

My goal is to have the same behavior like with the ultimaker board.

Actually i fail at the leveling procedure.

Behavior UM:

start leveling:
homing z-max down
raising up Z to about 150 or 160
i have to raise it manually with the wheel until the nozzle is about 1mm away from the bed (checking 3 points)
after that i push the button and he raises up 1mm now i have to level again every 3 points
i think that he is saving his Z0 point at this time

how can i rebuild that?

Cause i only have Z max i have to tell the FW how much Z is allowed to travel with the variable Z-lengt

Sure i can measure it out and only level at exact the same point, but that´s not the behavior of the ultimaker and makes trouble if i change the nozzle or hotend.

that´s what i´ve actually got in homeall
G91 ; relative positioning
G1 S1 X-215 Y-215 F6000 ; move quickly to X and Y axis endstops and stop there (first pass)
G1 X5 Y5 F6000 ; go back a few mm
G1 S1 X-215 Y-215 F3000 ; move slowly to X and Y axis endstops once more (second pass)
G1 S1 Z205 F3000 ; move Z down stopping at the endstop
G1 Z-5 F3000 ; move Z 5mm up
G1 S1 Z205 F1500 ; move Z down stopping at the endstop
G92 Z211.4 ; Zmax = 211.4mm
G91 ; absolute positioning
G1 Z-5 F3000 S2 ; lift nozzle
G90

that´s my leveling macro
i´ve turned out an endstop (M577 E0 S0) to use it as a button for the leveling procedure, to start when i want it
G4 is only to prevent pushing the button once will used for 2 leveling pointa

G1 Z10 F6000 ; fahre bett hoch schnell
G4 S1 ; warte 1sec
M577 E0 S0 ; taster betätigenn
G1 Z1 F1000 ; fahre bett noch weiter hoch langsam
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigenn
G1 X96 Y0 F3000 ; levelposition hinten mitte 1.mal
G1 Z0.1 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X0 Y200 F3000 ; levelposition vorne links 1. mal
G1 Z0.1 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X200 Y200 F3000 ; levelposition vorne rechts 1. mal
G1 Z0.1 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X96 Y0 F3000 ; levelposition hinten mitte 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X0 Y200 F3000 ; levelposition vorne links 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X200 Y200 F3000 ; levelposition vorne rechts 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X96 Y0 F3000 ; levelposition hinten mitte 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X0 Y200 F3000 ; levelposition vorne links 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z2 F3000 ; Bett weg fahren für nächste Position
G1 X200 Y200 F3000 ; levelposition vorne rechts 2. mal
G1 Z0 F100 ; bett zum leveln hinfahren
G4 S1 ; warte 1 sec
M577 E0 S0 ; taster betätigen
G1 Z195 F3000 ; Bett weg fahren
G1 X5 Y5 F6000 ; hotend wegfahren, fertig abputzen

Greetings from Germany

ok thanks for your help
have a great day

here a picture of the wires connected to the motor
http://www.youscreen.de/metmbwqaj02.jpg

can´t see any damage.
but now it´s getting strange!
the new cable, only 15cm long 4 seperate wires so i can see that there is absolutely no connection to each other
Motor current is set to 800mA

This i tried on the Y-connector
trying the small nema 0,5A in my handworking, but doing verry strange movements
trying the one of the nema 1.7A (Z-axis), witch are build on the hypercube, the error comes again. That motor worked on the Z-axis connector without problems

This on the X-connector
now i plugged the Z-motor (giving an error on Y) on the X connector. working for 2seconds doing trange movements and then i had the error.
the small 0,5A nema working, but doing that strange movements

strange movements:
i would say he´s getting an right and left at the same time, so he doesn´t know what to do.

i wired everething like on this page
https://duet3d.com/wiki/Duet_WiFi_wiring_diagrams

first i thought, i have connected 2 wired wrong, so i turned the 2 A wires, the same movement of the motor

i got other cables her, will crimp a plug on them and test again

seems legit, but
why does the z-motors with the z-cable work on the Z connector and doesn´t work on the X and Y connector?
the X and Y motors either work with their calbles on the Z Connector

Good morning,
with disconected stepper motors i don´t get any mesage
without the fan i didn´t notice any temperature
i would say that the chips are a little bit warmer (2-3°)above environmental.
waited for 5minutes, is this long enough?