Hi Danal. Feel like I know you from all the other Anypubic threads 
I’ve opened the power adapter up and going to use insulated crimp ring connector to the power supply, and the ferrules that came with the kit.
Decided to do it properly, and ordered 12awg wire for the job as well.
Thanks!
Ok. Think I got it figured out. The problem was in the top of the config under the delta config. The height was set to 400. I replaced this number after having done a homing, so I could see what my real height is. Funnily enough it says in the config it’s to replaced and was set artificially high.
This is now my new line;
;*** The homed height is deliberately set too high in the following - you will adjust it during calibration.
M665 R162 L268 B85 H295.75 ; Set delta radius, diagonal rod length, printable radius and homed height