Haven't had any issues with it here for both bowden and feeders/guides for direct drives using 3:1 gearing, not really noticed any real difference pushing through by hand either.
Posts made by helluscorus
-
RE: C(r)apricorn tubing...posted in General Discussion
-
RE: New firmware 2.01 beta 2 availableposted in Firmware installation
Is it now normal for the DWC manual controls to ignore the configured the M208 maxima? I'm not using max endstops on my cartesian and now it's able to crash past the set maxima when jogging the axis around. The previously installed 2.0 release build did not allow this with the same config.