Posts made by huge

@ecnsupplies
It actually is 2.4/5.0 will give it a try to use only 2.4.
Thanks

Hello,
i have some trouble with my Duet 2 Wifi.
I am able to access my printer via web, wifi and via usb, YAT.

After a while the wifi connection gets interrupted and i cannot access the printer via web anymore. If this happens i can use USB and YAT to send M552 S0 and M552 S1, to reconnect via wifi. Any ideas why this may be happening?

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.6 (2023-07-21)
Duet WiFi Server Version: 1.27

M122

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.6 (2023-07-21 14:08:28) running on Duet WiFi 1.02 or later
Board ID: 08DGM-9T6BU-FG3S8-6J1FA-3S86M-9BKBF
Used output buffers: 1 of 26 (13 max)
=== RTOS ===
Static ram: 23896
Dynamic ram: 75212 of which 36 recycled
Never used RAM 9408, free system stack 110 words
Tasks: NETWORK(ready,64.3%,215) HEAT(notifyWait,0.1%,277) Move(notifyWait,3.0%,284) MAIN(running,32.3%,408) IDLE(ready,0.3%,30), total 100.0%
Owned mutexes: WiFi(NETWORK) USB(MAIN)
=== Platform ===
Last reset 03:22:52 ago, cause: power up
Last software reset at 2023-11-21 21:39, reason: User, GCodes spinning, available RAM 9932, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 31.1, current 32.2, max 47.0
Supply voltage: min 10.1, current 12.1, max 12.2, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/40/40, gc cycles 0
Events: 4 queued, 4 completed
Driver 0: standstill, SG min 0
Driver 1: standstill, SG min 0
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min 0
Driver 4: standstill, SG min n/a
Driver 5:
Driver 6:
Driver 7:
Driver 8:
Driver 9:
Driver 10:
Driver 11:
Date/time: 2023-11-22 21:07:45
Cache data hit count 4294967295
Slowest loop: 300.20ms; fastest: 0.15ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 7.8ms, write time 37.3ms, max retries 0
=== Move ===
DMs created 83, segments created 28, maxWait 2187008ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 560, completed 560, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 6], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "M122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== Network ===
Slowest loop: 254.08ms; fastest: 0.07ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 0 of 8
= WiFi =
Interface state: active
Module is connected to access point
Failed messages: pending 0, notready 0, noresp 4
WiFi firmware version 1.27
WiFi MAC address cc:50:e3:15:60:78
WiFi Vcc 3.32, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25952
WiFi IP address 192.168.0.8
WiFi signal strength -63dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

The reason is exaclty as Phaerdrux explained. I am using a piezo on the nozzle to home my Z axis.
Thanks for the quick answers guys

Hello,
is there a way i can generate a random area around the center of my bed to home my z axis? thanks