Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. kouta10
    • Profile
    • Following 1
    • Followers 0
    • Topics 1
    • Posts 8
    • Best 1
    • Controversial 0
    • Groups 0

    kouta10

    @kouta10

    1
    Reputation
    1
    Profile views
    8
    Posts
    0
    Followers
    1
    Following
    Joined Last Online

    kouta10 Unfollow Follow

    Best posts made by kouta10

    • RE: Preview version of CNC optimized DWC.

      @dc42 sorry problem from my end, I put it back to printer mode and problem continued but strange because yesterday it seemed to fix the problem so I thought I will have a look at the terminal connector and found the problem with one of wires. Thanks for help

      posted in CNC
      kouta10undefined
      kouta10

    Latest posts made by kouta10

    • RE: Preview version of CNC optimized DWC.

      @dc42 sorry problem from my end, I put it back to printer mode and problem continued but strange because yesterday it seemed to fix the problem so I thought I will have a look at the terminal connector and found the problem with one of wires. Thanks for help

      posted in CNC
      kouta10undefined
      kouta10
    • RE: Preview version of CNC optimized DWC.

      @wilriker the error messages change too fast to make out a complete message. I have watched it for a small time to see if they are looping but couldn't pick up at what point they loop. They chang every .3 of a second. So it's to fast to read them.

      posted in CNC
      kouta10undefined
      kouta10
    • RE: Preview version of CNC optimized DWC.

      @jay_s_uk when I take it out of cnc mode it fine. Even when I was using rrf 2 with workbee web control it was ok. After I have updated my firmware to rrf 3.2 it was still fine even after uploading the cnc web control but as soon as I put it in cnc mode to use the cnc web control I get the problem.

      posted in CNC
      kouta10undefined
      kouta10
    • RE: Preview version of CNC optimized DWC.

      @jay_s_uk my cable is 1.7m. I know its longer then recommended but its didn't seem to be an issue for the standard version of the web control.

      posted in CNC
      kouta10undefined
      kouta10
    • RE: Preview version of CNC optimized DWC.

      Hi guys, I am running duetwifi with rrf 3.2. When I switch over to cnc mode with cnc web interface, my paneldue 5i displays random error messages that keep changing. Any one else having this issue? I have tried firmware 1.24 and 3.2.9 on paneldue with the same result.

      posted in CNC
      kouta10undefined
      kouta10
    • RE: M675 probe cavity issues

      The hole idea is to use probe as trigger for cavity, i don't see how that works any other way unless i understood it wrong.

      posted in CNC
      kouta10undefined
      kouta10
    • RE: M675 probe cavity issues

      @Phaedrux if i got my x end fixed at low end of axis, how does that work? If cavity is in the middle of the bed, x never gets triggered.

      posted in CNC
      kouta10undefined
      kouta10
    • M675 probe cavity issues

      Hi, I am hoping someone can help me with this. I can probe on xyz using m585 with configured endstop, but i cant get m675 to work. This is what my macro looks like,

      G91
      T1
      M675 X10 E3 L0 R2 F500

      When I run the macro the machine starts moving in the -x direction and when i trigger the end stop nothing happens. It wont stop moving on the -x direction until i hit the e stop.

      This is my config.g file
      ; Configuration file for factory testing Duet Ethernet and Wifi with V2.02 firmware
      ;
      ; generated by RepRapFirmware Configuration Tool v2.1.4 on Wed Dec 18 2019 20:29:17 GMT+1100 (Australian Eastern Daylight Time)

      ; General preferences
      G90 ; send absolute coordinates...
      M83 ; ...but relative extruder moves
      M550 P"cnc" ; set printer name
      M453 ; cnc mode

      ; Network
      M552 S1 ; enable network
      M552 P192.168.0.60 ;
      M586 P0 S1 ; enable HTTP
      M586 P1 S0 ; disable FTP
      M586 P2 S0 ; disable Telnet

      ; Drives
      M569 P0 S1 ; physical drive 0 goes forwards
      M569 P1 S1 ; physical drive 1 goes forwards
      M569 P2 S0 ; physical drive 2 goes forwards
      M569 P3 S0 ; physical drive 3 goes backwards
      M569 P4 S1 ; physical drive 4 goes backwards
      ;M584 X0:3 Y1:4 Z2 U3 V4 P3 ; set drive mapping
      M584 X0 Y1:4 Z2 V4 P3 ; set drive mapping
      M350 X16 Y16 Z16 U16 V16 I1 ; configure microstepping with interpolation
      M92 X643 Y643 Z400.00 U100 V643 ; set steps per mm
      M566 X600.00 Y600.00 Z12.00 U600.00 V600.00 ; set maximum instantaneous speed changes (mm/min)
      M203 X3000.00 Y3000.00 Z249.60 U2000.00 V3000.00 ; set maximum speeds (mm/min)
      M201 X50.00 Y50.00 Z20.00 U50.00 V50.00 ; set accelerations (mm/s^2)
      M906 X2200 Y2400 Z2400 V2400 I30 ; set motor currents (mA) and motor idle factor in per cent
      M84 S30 ; Set idle timeout

      ; Axis Limits
      M208 X0 Y0 Z-80 U0 V0 S1 ; set axis minima
      M208 X555 Y410 Z80 U410 V410 S0 ; set axis maxima

      ; Endstops
      M574 X2 S1 C0 ; set active low and disabled endstops
      M574 Y2 S1 C1 ; set active low
      ,M574 Z1 S0 C2 ; set active low
      M574 Z2 S1 C2 ; set active low
      M574 U1 S0 C3 ; set active low
      M574 V2 S1 C4 ; set active low

      ; Heaters
      M140 H-1 ; disable heated bed

      ; Tools
      M563 P1 D0 ;

      ; Fans
      M106 P0 S0 I0 F500 H-1 ; set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off

      ;
      ; Miscellaneous
      M501 ; load saved parameters from non-volatile memory
      M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
      M98 Pcustomconfig.g ;
      T0 ; select first tool
      ; M117 Use https://configurator.reprapfirmware.org/ to set up your printer com

      posted in CNC
      kouta10undefined
      kouta10