Figured it out. both my computer and cell phone were in "Public network mode" and wouldn't communicate with other devices on the network. Thanks for the help, probably wouldn't have figured it out without it.
Posts made by LanguidLlama
-
RE: Duet Wifi 2 connected to network, but unable to access DWCposted in Duet Web Control
-
RE: Duet Wifi 2 connected to network, but unable to access DWCposted in Duet Web Control
@droftarts This is probably pretty close to the problem. I thought it probably had something to do with the network. Unfortunately I am not the owner of the network, so it'll take some back and forth to get this done. Thanks for your help, it is much appreciate. I will report back when I get it working.
-
RE: Duet Wifi 2 connected to network, but unable to access DWCposted in Duet Web Control
@dc42 the ping does not go through
-
Duet Wifi 2 connected to network, but unable to access DWCposted in Duet Web Control
Like the title says I have it connected via USB to my computer through YAT. When I run M552 I get "ok<LF>WiFi module is connected to access point My Eero, IP address 192.168.1.17<LF>"
When I type in that IP address nothing connects. The DWC Test page also does not work.
My computer is connected to the same network
My android phone will not connect either
I've used Chrome and EdgeI've tried
Restarting the Duet
Restarting computer
restarting the router
Deleting the network and re entering ssid and password