Not sure why it looks like the M122 cuts off after Socket States:
Posts made by Lickett_E_Splitt
-
RE: Failed to add SSID to remembered list Duet 2 WIFIposted in General Discussion
-
RE: Failed to add SSID to remembered list Duet 2 WIFIposted in General Discussion
Sorry, thought I had all the output from M122 that we needed. Here is the full output.
WiFi module is idle
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917DA-G4MSD-6J1F8-3SJ6L-K8TV9
Used output buffers: 4 of 20 (4 max)
=== RTOS ===
Static ram: 25524
Dynamic ram: 98532 of which 0 recycled
Exception stack ram used: 256
Never used ram: 6760
Tasks: NETWORK(ready,1276) HEAT(blocked,1256) MAIN(running,3868) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:00:21 ago, cause: power up
Last software reset time unknown, reason: Heat task stuck, spinning module Platform, available RAM 6356 bytes (slot 0)
Software reset code 0x00a0 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0043380f BFAR 0xe000ed38 SP 0x2000493c Task 0x4e49414d
Stack: 0043ca33 00449aae 41000000 00000000 00000000 00000000 00000000 3e178897 3e1cd04f 41880000 3e3a33b0 3e638eb9 3e92497a 3b750939 3ecccd35 bd7a7541 3f800000 c0a00000 00000000 60000010 00000001 2000855c 0043ca33
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 21.4, current 25.2, max 25.3
Supply voltage: min 0.0, current 0.1, max 0.2, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 39256480
Slowest loop: 0.26ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 240, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.27ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8- WiFi -
Network state is changing mode
WiFi module is idle
Failed messages: pending 0, notready 0, noresp 0
Failed to get WiFi status
Socket states: 0 0 0 0 0 0 0 0
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
- WiFi -
-
RE: Failed to add SSID to remembered list Duet 2 WIFIposted in General Discussion
I just downloaded the WIFI Firmware from the Github link above, uploaded it, It counted down in 5% increments and I got Upload Successful.
M122 still reports
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917DA-G4MSD-6J1F8-3SJ6L-K8TV9
Used output buffers: 7 of 20 (7 max)
=== RTOS ===Then
M587 S"my SSID" P"My network password"
ok
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
M587
M587: Failed to retrieve network list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
M552 S1
ok
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
M587 S"my SSID" P"My network password"
M587: Failed to add SSID to remembered list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found -
Failed to add SSID to remembered list Duet 2 WIFIposted in General Discussion
Not sure what step to take next. I'm trying to connect to the WIFI network.
The router is an ASUS RT-AC66R that's hidden. It has WPA2-Personal security if that makes a difference. I've tried both the 2.4 and 5 bands. I set my cellphone as a hotspot and tried that. All with the same results.
The commands sent are below followed by the results of M122.
For brevity I cut out the "no known networks found" and "WIFI module is idle" that were between the commands.
M552 S0
ok
WiFi reported error: no known networks found
M552 S1
ok
WiFi reported error: no known networks found
M587 S"My SSID was here" P"My Network Password was here"
M587: Failed to add SSID to remembered list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found
M587
M587: Failed to retrieve network list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
M588 S"*"
M588: Failed to reset the WiFi module to factory settings
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
M587
M587: Failed to retrieve network list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idleM122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02(RTOS) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917DA-G4MSD-6J1F8-3SJ6L-K8TV9
Used output buffers: 13 of 20 (13 max)
=== RTOS ===
Static ram: 25524
Dynamic ram: 98532 of which 0 recycled
Exception stack ram used: 256
Never used ram: 6760
Tasks: NETWORK(ready,1240) HEAT(blocked,1256) MAIN(running,3868) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:01:42 ago, cause: power up
Last software reset time unknown, reason: Heat task stuck, spinning module Platform, available RAM 6356 bytes (slot 0)
Software reset code 0x00a0 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0043380f BFAR 0xe000ed38 SP 0x2000493c Task 0x4e49414d
Stack: 0043ca33 00449aae 41000000 00000000 00000000 00000000 00000000 3e178897 3e1cd04f 41880000 3e3a33b0 3e638eb9 3e92497a 3b750939 3ecccd35 bd7a7541 3f800000 c0a00000 00000000 60000010 00000001 2000855c 0043ca33
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 22.5, current 28.1, max 28.1
Supply voltage: min 0.0, current 0.3, max 0.3, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 195632570
Slowest loop: 201.06ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 240, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found