@fcwilt Appreciate the reply.
Posts made by llamatrails
-
RE: DuetWiFi: upgrading from firmware 2.04
-
DuetWiFi: upgrading from firmware 2.04
It has been a while, but now I can get back to 3D printing.
My DuetWiFi board is currently running:
-
firmware: 2.04
-
wifi server: 1.23
-
web control: 2.04
What is my best way to upgrade to the current 3.4.0 betaX release?
Can I safely upgrade from the Web Control interface ?
If not, where might I find the docs to prepare a new SD card that will upgrade the firmware, server, and control on boot of the SD card?
TIA,
Rick -
-
RE: Rpi browser for DWC?
I'm using Chromium on a RPi2 and it works fine with my DuetWiFi.
Rick
-
RE: FTP and Telnet: working yet ?
Got WinSCP to work.
Had to disable UTF-8 encoding for filenames, Use MLSD for filenames, and Support for hidden filenames.
All three options were set to Auto.
Rick
-
RE: FTP and Telnet: working yet ?
Yep, FileZilla works for me. too.
I was using WinSCP which can't get a directory listing on connect. Looks like FileZilla is my new client program …
Rick
-
RE: FTP and Telnet: working yet ?
Ok, so telnet will only accept gcode commands. No wonder there isn't any output when connecting.
Is there a list of ftp supported commands?
Googling didn't help with docs on using ftp or telnet in reprap firmware. Sigh.
-
FTP and Telnet: working yet ?
Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.19 (2017-08-14)
WiFi Server Version: 1.19
Web Interface Version: 1.19M586
[11:40:55:072] HTTP is enabled on port 80␊
[11:40:55:072] FTP is enabled on port 21␊
[11:40:55:072] TELNET is enabled on port 23␊
[11:40:55:072] ok␊I can log in to FTP with any username, using the default password defined in the config.g but no commands return any output.
0:0 rick ! > ftp 192.168.1.195
Connected to 192.168.1.195.
220 RepRapFirmware FTP server
Name (192.168.1.195:rick):
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
500 Unknown command.
ftp: bind: Address already in use
ftp>quit
221 Goodbye
0:0 rick !>If I telnet in, it never asks for a login or password or any output, but an 'ls' returns 'ok'.
0:0 rick ! > telnet 192.168.1.195
Trying 192.168.1.195…
Connected to 192.168.1.195.
Escape character is '^]'.ls
ok
^]
telnet> quit
Connection closed.
0:1 rick ! >Are ftp and telnet supposed to work?
If so, what am I doing wrong? Googling hasn't helped, sigh.TIA,
Rick -
RE: Polycarbonate build plate…. No bed heat Success!!!
Instead of sanding, would matte (or frosted or satin) finish PC work ?
For example:
https://www.amazon.com/gp/product/B00II1QY9Y/ref=s9_dcacsd_dcoop_bw_c_x_1_w