Thank you that helped. It is now working.

Is there a way to "trick" the printer from the Standby mode via PanelDue? So we can use it in mean time. (It is not easy for our corporate environment to use web server every time)

Thank you

I just upgared to latest paneldue FW, now it says Standby, but SDcard and macros are still not accessible (pictures attached). I do not use any external powersource now, I just connected Duet board to USB3.0 (so there should not be any power issue), ethernet and 30cm ribbon cable to PanelDue.

The board is not yet in the printer, so I cannot home it and I have heater temperature errors. Can this be the problem? Do I have to have NO error to access these files?

Re: PanelDuet connecting

Hello.

I just bought latest versions of Duet Ethernet (fw 2.0) and PanelDuet (fw 1.17). I connected it together via 30cm ribbon cable (and later tried also supplied 4wire cable with same result). PanelDue always shows Connecting on upper right corner, but it shows information from the Duet (temperatures, console etc.), and by pressing STOP on panel, Duet will go to emergency stop. However I am not able to see macros, or contetnt of any SD card.

BAUD on PanelDue is 57600, and there is no M575 command in config.g as you wrote on different thread.

I am supplying the board from USB and watching by ethernet. Nothing else is connected.

Thank you.