Posts made by Lukas_Meintjes

Will do ,Thanks for for your help.

Both the 10A & 15A Fuses are good
Any test points on the PCB worth checking?

Fuses are good
Some light discoloration on the PCB near the fuses.
Did not notice any burning smells during setup.



Thanks for your quick response...

Good day
My Rat Rig V-Core 3 using a Duet 3 Mini 5+ WiFi V1.01 failed mid test print and now will only run with USB connected .
I completed the 1hr long test print cube with the USB connected.
With the USB disconnected 5V & 3.3V LEDs are off, WiFi connection is lost.
24V PSU is good.
Some help with diagnosing the problem would be appreciated.....Thanks