they look / seem great! i've attached links to the pics of the screenshots.
screenshots:
https://drive.google.com/file/d/1OJot52kcPcI_lhu6eXJbHUt2grTq9hHb/view?usp=sharing
https://drive.google.com/file/d/1MJ1EgVX3GVRuyfEY9jKrvdYvZwxhH1is/view?usp=sharing
PRESTO, i restarted after adding the '/' and it uploaded to the duet! you are the best. i love support forums with experts and creators!
ill follow up when i get home to the actual system/printer and try to 'print to the duet/artemis'!!!
so i just tried this out (im at work so im doing remotely on my home pc…)
however, i used the v0.0.10 and recreated the printer in the extension, gave the password 'reprap', and left the otehr 2 user / password boxes blank.
i tried to upload to the duet-artemis (since im not there and i have something else currently printing... i tested with the 'upload' only for now...
got the following error attmepting to upload:
there was a network error: 3 host 173.16.31.76rr connect_not_found,
2018-03-20 10:45:58,695 - DEBUG - [(13308)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [413]: PrinterConnection.close: cannot join current thread (expected)
2018-03-20 10:45:58,699 - WARNING - [(6976)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
2018-03-20 10:48:05,492 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [143]: Filename set to: A_Semi.gcode
2018-03-20 10:48:05,492 - DEBUG - [(6976)-MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [66]: 'info/send_slice_info' is turned off.
2018-03-20 10:48:05,493 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [156]: Loading gcode…
2018-03-20 10:48:05,493 - DEBUG - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [176]: Connecting…
2018-03-20 10:48:05,530 - ERROR - [(6976)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice._onNetworkError [352]: _onNetworkError: 3
y'all are the best! ill d/load the v0.0.10 this afternoon, and install it, re-create the duetrrf config, and test it out!
also, what do i enter for the passwords:
duet password: reprap ?
http basic user: ?
http auth basic password: ?
so i renamed the cura.log so i can get a fresh , smaller one: here is the log, at the bottom section is the 301 error (while i attempted to 'upload file to duetrrf'
–------------------------
2018-03-20 08:19:12,806 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FileLogger
2018-03-20 08:19:12,860 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin FirmwareUpdateChecker
2018-03-20 08:19:12,866 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeProfileReader
2018-03-20 08:19:12,883 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeReader
2018-03-20 08:19:12,894 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin GCodeWriter
2018-03-20 08:19:12,903 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ImageReader
2018-03-20 08:19:12,910 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LegacyProfileReader
2018-03-20 08:19:12,919 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalContainerProvider
2018-03-20 08:19:12,929 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin LocalFileOutputDevice
2018-03-20 08:19:12,937 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MachineSettingsAction
2018-03-20 08:19:12,946 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MonitorStage
2018-03-20 08:19:12,961 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PerObjectSettingsTool
2018-03-20 08:19:12,971 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PluginBrowser
2018-03-20 08:19:12,981 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PostProcessingPlugin
2018-03-20 08:19:12,988 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin PrepareStage
2018-03-20 08:19:13,000 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RemovableDriveOutputDevice
2018-03-20 08:19:13,020 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimulationView
2018-03-20 08:19:13,032 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SliceInfoPlugin
2018-03-20 08:19:13,040 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SolidView
2018-03-20 08:19:13,049 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin CameraTool
2018-03-20 08:19:13,059 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin MirrorTool
2018-03-20 08:19:13,071 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin RotateTool
2018-03-20 08:19:13,087 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin ScaleTool
2018-03-20 08:19:13,098 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SelectionTool
2018-03-20 08:19:13,108 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin TranslateTool
2018-03-20 08:19:13,123 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UltimakerMachineActions
2018-03-20 08:19:13,177 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UM3NetworkPrinting
2018-03-20 08:19:13,188 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UpdateChecker
2018-03-20 08:19:13,190 - INFO - [(14864)-Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
2018-03-20 08:19:13,226 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin USBPrinting
2018-03-20 08:19:13,234 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin UserAgreementPlugin
2018-03-20 08:19:13,249 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade21to22
2018-03-20 08:19:13,257 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade22to24
2018-03-20 08:19:13,266 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade25to26
2018-03-20 08:19:13,275 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade26to27
2018-03-20 08:19:13,286 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade27to30
2018-03-20 08:19:13,298 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin VersionUpgrade30to31
2018-03-20 08:19:13,306 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin SimpleView
2018-03-20 08:19:13,321 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin X3DReader
2018-03-20 08:19:13,337 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XmlMaterialProfile
2018-03-20 08:19:13,350 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin XRayView
2018-03-20 08:19:13,365 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
2018-03-20 08:19:13,367 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
2018-03-20 08:19:13,368 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
2018-03-20 08:19:13,369 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin Cura-DuetRRFPlugin-master
2018-03-20 08:19:13,380 - INFO - [(11228)-MainThread] UM.PluginRegistry.loadPlugin [238]: Loaded plugin OrientationPlugin
2018-03-20 08:19:13,389 - ERROR - [(11228)-MainThread] UM.Qt.QtApplication.getTheme [325]: The theme cannot be accessed before the engine is initialised
2018-03-20 08:19:13,393 - INFO - [(11228)-MainThread] UM.VersionUpgradeManager.upgrade [113]: Looking for old configuration files to upgrade.
2018-03-20 08:19:13,393 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [340]: Attempting to connect to COM5
2018-03-20 08:19:13,672 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2018-03-20 08:19:13,681 - INFO - [(11228)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
2018-03-20 08:19:13,685 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.2\resources\definitions\fdmprinter.def.json', '']
2018-03-20 08:19:13,690 - WARNING - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
2018-03-20 08:19:13,761 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:19:13,763 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] Cura_SteamEngine version DEV
2018-03-20 08:19:13,764 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] Copyright (C) 2017 Ultimaker
2018-03-20 08:19:13,768 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:19:13,769 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2018-03-20 08:19:13,771 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2018-03-20 08:19:13,771 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] This program is free software: you can redistribute it and/or modify
2018-03-20 08:19:13,773 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-03-20 08:19:13,776 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-03-20 08:19:13,777 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] (at your option) any later version.
2018-03-20 08:19:13,779 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:19:13,780 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] This program is distributed in the hope that it will be useful,
2018-03-20 08:19:13,781 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-03-20 08:19:13,783 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-03-20 08:19:13,784 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] GNU Affero General Public License for more details.
2018-03-20 08:19:13,785 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:19:13,786 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-03-20 08:19:13,787 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2018-03-20 08:19:15,189 - INFO - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [348]: Could not establish connection on COM5: 'Timeout'. Device is not arduino based.
2018-03-20 08:19:15,189 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 115200
2018-03-20 08:19:15,399 - WARNING - [(11228)-MainThread] UM.Preferences.getValue [81]: Tried to get the value of non-existing setting view/filter_current_build_plate.
2018-03-20 08:19:15,401 - DEBUG - [(11228)-MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [101]: Select build plate: 0
2018-03-20 08:19:15,404 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveStage [155]: Setting active stage to PrepareStage
2018-03-20 08:19:15,406 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2018-03-20 08:19:15,419 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS
2018-03-20 08:19:15,422 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS_user
2018-03-20 08:19:15,426 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_defaut
2018-03-20 08:19:15,430 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container normal
2018-03-20 08:19:15,432 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container ARTEMIS_settings
2018-03-20 08:19:15,434 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom
2018-03-20 08:19:15,500 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2
2018-03-20 08:19:15,503 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2_user
2018-03-20 08:19:15,505 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container polywood_pla
2018-03-20 08:19:15,506 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4 #2_settings
2018-03-20 08:19:15,509 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_4
2018-03-20 08:19:15,511 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_4 #2] added to [ARTEMIS] at position [3]
2018-03-20 08:19:15,513 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,514 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2
2018-03-20 08:19:15,516 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2_user
2018-03-20 08:19:15,518 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7 #2_settings
2018-03-20 08:19:15,520 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_7
2018-03-20 08:19:15,523 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_7 #2] added to [ARTEMIS] at position [6]
2018-03-20 08:19:15,524 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,525 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2
2018-03-20 08:19:15,528 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2_user
2018-03-20 08:19:15,530 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3 #2_settings
2018-03-20 08:19:15,533 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_3
2018-03-20 08:19:15,539 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_3 #2] added to [ARTEMIS] at position [2]
2018-03-20 08:19:15,542 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,544 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2
2018-03-20 08:19:15,546 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2_user
2018-03-20 08:19:15,548 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8 #2_settings
2018-03-20 08:19:15,550 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_8
2018-03-20 08:19:15,552 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_8 #2] added to [ARTEMIS] at position [7]
2018-03-20 08:19:15,553 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,555 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2
2018-03-20 08:19:15,558 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2_user
2018-03-20 08:19:15,560 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6 #2_settings
2018-03-20 08:19:15,562 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_6
2018-03-20 08:19:15,565 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_6 #2] added to [ARTEMIS] at position [5]
2018-03-20 08:19:15,566 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,567 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2
2018-03-20 08:19:15,569 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2_user
2018-03-20 08:19:15,571 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2 #2_settings
2018-03-20 08:19:15,573 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_2
2018-03-20 08:19:15,576 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_2 #2] added to [ARTEMIS] at position [1]
2018-03-20 08:19:15,577 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,579 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2
2018-03-20 08:19:15,581 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2_user
2018-03-20 08:19:15,583 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5 #2_settings
2018-03-20 08:19:15,585 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_5
2018-03-20 08:19:15,588 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_5 #2] added to [ARTEMIS] at position [4]
2018-03-20 08:19:15,589 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,591 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2
2018-03-20 08:19:15,594 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2_user
2018-03-20 08:19:15,596 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_defaut
2018-03-20 08:19:15,599 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container generic_pla_175
2018-03-20 08:19:15,603 - DEBUG - [(11228)-MainThread] XmlMaterialProfile.XmlMaterialProfile.deserialize [544]: Found definition for machine ID imade3d_jellybox
2018-03-20 08:19:15,612 - DEBUG - [(11228)-MainThread] XmlMaterialProfile.XmlMaterialProfile.deserialize [544]: Found definition for machine ID cartesio
2018-03-20 08:19:15,621 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1 #2_settings
2018-03-20 08:19:15,623 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1
2018-03-20 08:19:15,626 - INFO - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [73]: Extruder[custom_extruder_1 #2] added to [ARTEMIS] at position [0]
2018-03-20 08:19:15,627 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,629 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_4 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,630 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,631 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_4 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,632 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_7 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,633 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,634 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_7 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,635 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_3 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,636 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,637 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_3 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,639 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_8 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,640 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,641 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_8 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,642 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_6 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,643 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,644 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_6 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,645 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_2 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,646 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,647 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_2 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,648 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_5 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,649 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,650 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_5 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,651 - WARNING - [(11228)-MainThread] cura.Settings.GlobalStack.addExtruder [69]: Extruder [custom_extruder_1 #2] has already been added to this stack [ARTEMIS]
2018-03-20 08:19:15,652 - WARNING - [(11228)-MainThread] UM.Settings.ContainerStack.addMetaDataEntry [166]: Meta data with key machine was already added.
2018-03-20 08:19:15,653 - WARNING - [(11228)-MainThread] cura.Settings.ExtruderManager.registerExtruder [223]: Extruder [custom_extruder_1 #2] has already been registered on machine [ARTEMIS], not doing anything
2018-03-20 08:19:15,658 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container fdmprinter
2018-03-20 08:19:16,262 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.33 s
2018-03-20 08:19:16,695 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.33 s
2018-03-20 08:19:17,134 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-dark\theme.json
2018-03-20 08:19:17,136 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-light\theme.json
2018-03-20 08:19:17,230 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [240]: Loaded theme C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-light
2018-03-20 08:19:17,232 - DEBUG - [(11228)-MainThread] UM.Qt.Bindings.Theme.load [240]: Loaded theme C:\Program Files\Ultimaker Cura 3.2\resources\themes\cura-dark
2018-03-20 08:19:17,388 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2018-03-20 08:19:18,656 - DEBUG - [(11228)-MainThread] UM3NetworkPrinting.DiscoverUM3Action._createAdditionalComponentsView [136]: Creating additional ui components for UM3.
2018-03-20 08:19:18,681 - DEBUG - [(11228)-MainThread] UM3NetworkPrinting.DiscoverUM3Action.startDiscovery [36]: Starting printer discovery.
2018-03-20 08:19:18,694 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010008811950683594 seconds
2018-03-20 08:19:18,715 - DEBUG - [(11228)-MainThread] UM.Controller.setActiveStage [155]: Setting active stage to PrepareStage
2018-03-20 08:19:19,271 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_abs_default
2018-03-20 08:19:19,275 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._onInstanceContainersChanged [365]: Connecting profiles model…
2018-03-20 08:19:19,276 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_fine
2018-03-20 08:19:19,279 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_he280-pla-default
2018-03-20 08:19:19,284 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_petg_default
2018-03-20 08:19:19,288 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_fast
2018-03-20 08:19:19,290 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_pla_fast
2018-03-20 08:19:19,293 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_abs_default
2018-03-20 08:19:19,297 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_spiral_vase
2018-03-20 08:19:19,299 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_petg_default
2018-03-20 08:19:19,301 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_fdmextruder_he280-pla-default
2018-03-20 08:19:19,303 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_extruder_1_se300_pla_fine
2018-03-20 08:19:19,305 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container custom_se300_spiral_vase
2018-03-20 08:19:19,315 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container low
2018-03-20 08:19:19,317 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container high
2018-03-20 08:19:19,319 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container draft
2018-03-20 08:19:19,321 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container extra_coarse
2018-03-20 08:19:19,323 - DEBUG - [(11228)-MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [50]: Loading container coarse
2018-03-20 08:19:19,627 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020012855529785156 seconds
2018-03-20 08:19:19,716 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010008811950683594 seconds
2018-03-20 08:19:20,149 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
2018-03-20 08:19:20,408 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0015015602111816406 seconds
2018-03-20 08:19:20,845 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
2018-03-20 08:19:21,373 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0010018348693847656 seconds
2018-03-20 08:19:21,602 - DEBUG - [(11228)-MainThread] UM.Qt.QtRenderer._initialize [184]: Support for Vertex Array Objects: True
2018-03-20 08:19:21,609 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [92]: Initialized OpenGL subsystems.
2018-03-20 08:19:21,610 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [93]: OpenGL Version: 4.1.0 NVIDIA 390.65
2018-03-20 08:19:21,611 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [94]: OpenGL Vendor: NVIDIA Corporation
2018-03-20 08:19:21,612 - DEBUG - [(11228)-MainThread] UM.View.GL.OpenGL.init [95]: OpenGL Renderer: GeForce GT 610/PCIe/SSE2
2018-03-20 08:19:21,613 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
2018-03-20 08:19:21,615 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\selection.shader]…
2018-03-20 08:19:21,617 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
2018-03-20 08:19:21,620 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\composite.shader]…
2018-03-20 08:19:21,623 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\overhang.shader]…
2018-03-20 08:19:21,626 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\striped.shader]…
2018-03-20 08:19:21,629 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\transparent_object.shader]…
2018-03-20 08:19:21,631 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\striped.shader]…
2018-03-20 08:19:21,639 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\default.shader]…
2018-03-20 08:19:21,642 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\grid.shader]…
2018-03-20 08:19:21,645 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\platform.shader]…
2018-03-20 08:19:22,000 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
2018-03-20 08:19:22,238 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020017623901367188 seconds
2018-03-20 08:19:22,767 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.32 s
2018-03-20 08:19:23,262 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
2018-03-20 08:19:23,262 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
2018-03-20 08:19:23,263 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [218]: Build plate 0 has no objects to be sliced, skipping
2018-03-20 08:19:31,705 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 250000
2018-03-20 08:19:32,198 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
2018-03-20 08:19:38,220 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 230400
2018-03-20 08:19:44,735 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 57600
2018-03-20 08:19:47,727 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-print already added
2018-03-20 08:19:47,730 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-simulate already added
2018-03-20 08:19:47,732 - INFO - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [103]: Output Device DuetRRF-upload already added
2018-03-20 08:19:51,251 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 38400
2018-03-20 08:19:57,726 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
2018-03-20 08:19:57,765 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 19200
2018-03-20 08:19:59,012 - DEBUG - [(2432)-Thread-5] UM.Mesh.MeshData.calculateNormalsFromVertices [421]: Calculating normals took 0.0010001659393310547 seconds
2018-03-20 08:19:59,013 - DEBUG - [(2432)-Thread-5] STLReader.STLReader.read [79]: Loaded a mesh with 924 vertices
2018-03-20 08:19:59,032 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01901841163635254 seconds. 90 input vertices. 90 output vertices.
2018-03-20 08:19:59,034 - DEBUG - [(2432)-Thread-5] UM.FileHandler.ReadFileJob.run [68]: Loading file took 0.0 seconds
2018-03-20 08:19:59,056 - DEBUG - [(2432)-Thread-5] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01901984214782715 seconds. 90 input vertices. 90 output vertices.
2018-03-20 08:19:59,068 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
2018-03-20 08:19:59,137 - DEBUG - [(11228)-MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:\Program Files\Ultimaker Cura 3.2\resources\shaders\transparent_object.shader]…
2018-03-20 08:19:59,451 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0030028820037841797 seconds
2018-03-20 08:19:59,617 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
2018-03-20 08:19:59,618 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
2018-03-20 08:20:02,008 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [381]: Sending slice message took 2.388291358947754 seconds
2018-03-20 08:20:02,137 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_bed_temperature to 75
2018-03-20 08:20:02,139 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting initial_extruder_nr to 0
2018-03-20 08:20:02,142 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_temperature to 205
2018-03-20 08:20:02,144 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting time to 08:19:59
2018-03-20 08:20:02,145 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting day to Tue
2018-03-20 08:20:02,146 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting date to 20-03-2018
2018-03-20 08:20:02,147 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] -s wireframe_flow="100" -s machine_settings="0" -s date="20-03-2018" -s max_skin_angle_for_expansion="90" -s support_bottom_density="100" -s cooling="0" -s support_tree_wall_thickness="0.4" -s raft_speed="30.0" -s meshfix="0" -s speed="0" -s speed_wall="40.0" -s acceleration_wall="3000" -s wireframe_printspeed="5" -s support_skip_zag_per_mm="20" -s travel_compensate_overlapping_walls_enabled="True" -s experimental="0" -s top_thickness="0.8" -s line_width="0.4" -s bottom_thickness="0.8" -s switch_extruder_retraction_speeds="20" -s command_line_settings="0" -s jerk_print="20" -s machine_head_polygon="[[-1, 1], [-1, -1], [1, -1], [1, 1]]" -s jerk_layer_0="20" -s time="08:19:59" -s wall_extruder_nr="-1" -s speed_support="35" -s brim_width="8.0" -s jerk_wall="20" -s raft_acceleration="3000" -s support_interface_pattern="lines" -s support_interface_line_width="0.4" -s infill_sparse_density="15" -s print_temperature="205" -s resolution="0" -s skin_overlap="5" -s skin_preshrink="1.2000000000000002" -s support_z_distance="0.15" -s support_interface_enable="False" -s shell="0" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop_only_when_collides="False" -s start_layers_at_same_position="False" -s jerk_prime_tower="20" -s travel_avoid_other_parts="True" -s jerk_support_roof="20" -s jerk_print_layer_0="20" -s material_print_temp_prepend="True" -s jerk_travel="30" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s jerk_wall_x="20" -s speed_layer_0="25" -s jerk_wall_0="20" -s machine_max_jerk_e="5.0" -s jerk_enabled="False" -s blackmagic="0" -s acceleration_support_roof="3000" -s prime_tower_enable="False" -s acceleration_wall_x="3000" -s support_bottom_line_width="0.5" -s max_feedrate_z_override="0" -s skirt_brim_minimal_length="200" -s raft_smoothing="5" -s cool_fan_full_at_height="0.3" -s conical_overhang_angle="50" -s skin_no_small_gaps_heuristic="True" -s speed_print="60" -s layer_start_x="0.0" -s speed_wall_x="50.0" -s speed_wall_0="45.0" -s speed_infill="60" -s switch_extruder_retraction_amount="16" -s spaghetti_infill_stepped="True" -s prime_tower_size="20" -s retraction_retract_speed="45" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s print_bed_temperature="75" -s material_surface_energy="100" -s travel_avoid_distance="0.625" -s jerk_ironing="20" -s retraction_extra_prime_amount="0" -s cross_infill_pocket_size="8.0" -s material_print_temperature_layer_0="205" -s material_print_temperature="205" -s jerk_topbottom="20" -s draft_shield_height="10" -s min_skin_width_for_expansion="1.2246467991473532e-16" -s flow_rate_extrusion_offset_factor="100" -s speed_travel_layer_0="250" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="1.2000000000000002" -s bottom_skin_preshrink="1.2000000000000002" -s extruder_prime_pos_abs="False" -s top_skin_preshrink="1.2000000000000002" -s adhesion_extruder_nr="0" -s infill_before_walls="False" -s gradual_infill_steps="0" -s infill_sparse_thickness="0.2" -s retraction_hop_enabled="True" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s skin_overlap_mm="0.02" -s speed_equalize_flow_enabled="False" -s mold_angle="40" -s acceleration_layer_0="3000" -s machine_start_gcode="G28 ;Home
2018-03-20 08:20:02,148 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 Z15.0 F6000 ;Move the platform down 15mm
2018-03-20 08:20:02,149 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] ;Prime the extruder
2018-03-20 08:20:02,150 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0
2018-03-20 08:20:02,151 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 F200 E3
2018-03-20 08:20:02,152 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0" -s wireframe_up_half_speed="0.3" -s machine_firmware_retract="False" -s infill_overlap_mm="0.04" -s outer_inset_first="False" -s raft_interface_line_spacing="1.0" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s infill_angles="[ ]" -s cross_infill_apply_pockets_alternatingly="True" -s zig_zaggify_infill="True" -s acceleration_topbottom="3000" -s material_extrusion_cool_down_speed="0.7" -s infill_pattern="cubic" -s support_tower_roof_angle="65" -s adaptive_layer_height_enabled="False" -s material_adhesion_tendency="10" -s machine_max_feedrate_x="500" -s travel_compensate_overlapping_walls_0_enabled="True" -s support="0" -s material_bed_temp_prepend="True" -s support_bottom_pattern="lines" -s machine_depth="290" -s speed_support_roof="23.333333333333332" -s wireframe_top_delay="0" -s acceleration_skirt_brim="3000" -s optimize_wall_printing_order="False" -s retraction_hop="1" -s machine_max_feedrate_z="5" -s acceleration_travel_layer_0="5000.0" -s layer_height="0.2" -s prime_tower_purge_volume="0" -s sub_div_rad_add="0.4" -s support_roof_line_width="0.5" -s machine_max_feedrate_y="500" -s meshfix_maximum_resolution="0.01" -s machine_max_acceleration_y="9000" -s machine_show_variants="False" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s machine_nozzle_size="0.4" -s speed_prime_tower="60" -s machine_heat_zone_length="16" -s support_zag_skip_count="10" -s cutting_mesh="False" -s roofing_layer_count="0" -s wireframe_drag_along="0.6" -s machine_heated_bed="True" -s roofing_extruder_nr="-1" -s switch_extruder_retraction_speed="20" -s gantry_height="99999999999" -s ironing_inset="0.2" -s layer_0_z_overlap="0.15" -s wireframe_bottom_delay="0" -s acceleration_wall_0="3000" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s retraction_prime_speed="45" -s machine_nozzle_temp_enabled="True" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s machine_width="290" -s top_layers="10" -s day="Tue" -s material_bed_temperature_layer_0="80" -s machine_max_acceleration_e="10000" -s support_bottom_height="1" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s machine_nozzle_id="unknown" -s layer_height_0="0.3" -s support_conical_min_width="5.0" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s multiple_mesh_overlap="0.15" -s material_diameter="1.75" -s top_bottom_extruder_nr="-1" -s machine_max_acceleration_z="100" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill_wipe_dist="0.1" -s machine_nozzle_tip_outer_diameter="1" -s wall_thickness="0.8" -s min_infill_area="0" -s machine_height="540" -s support_connect_zigzags="True" -s wall_x_extruder_nr="-1" -s brim_outside_only="True" -s infill_line_distance="8.0" -s machine_end_gcode="M104 S0
2018-03-20 08:20:02,153 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] M140 S0
2018-03-20 08:20:02,154 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] ;Retract the filament
2018-03-20 08:20:02,156 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G92 E1
2018-03-20 08:20:02,157 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G1 E-1 F300
2018-03-20 08:20:02,158 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] G28 X0 Y0
2018-03-20 08:20:02,159 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] M84" -s skirt_brim_line_width="0.4" -s acceleration_support="3000" -s brim_line_count="3" -s machine_max_acceleration_x="9000" -s slicing_tolerance="middle" -s ooze_shield_dist="2" -s ironing_flow="10.0" -s infill_line_width="0.4" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s acceleration_print_layer_0="3000" -s speed_roofing="45.0" -s material_standby_temperature="150" -s infill_extruder_nr="-1" -s skin_angles="[ ]" -s jerk_infill="20" -s acceleration_infill="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s jerk_skirt_brim="20" -s z_seam_relative="False" -s machine_shape="elliptic" -s cool_fan_speed="100.0" -s speed_travel="400" -s alternate_carve_order="True" -s spaghetti_inset="0.2" -s cool_fan_full_layer="3" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s material_bed_temp_wait="True" -s bottom_layers="10" -s machine_max_jerk_xy="20.0" -s wall_line_width_0="0.4" -s acceleration_enabled="False" -s skin_alternate_rotation="False" -s material_bed_temperature="75" -s prime_tower_line_width="0.4" -s machine_gcode_flavor="RepRap (RepRap)" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="True" -s travel="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_wait="True" -s wall_line_count="3" -s machine_minimum_feedrate="0.0" -s machine_name="Unknown" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s wall_0_wipe_dist="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s support_line_width="0.4" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_center_is_zero="True" -s smooth_spiralized_contours="True" -s skin_line_width="0.4" -s raft_interface_jerk="20" -s retraction_amount="3.2" -s machine_max_jerk_z="0.4" -s z_seam_corner="z_seam_corner_inner" -s machine_max_feedrate_e="299792458000" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_base_line_width="0.8" -s support_top_distance="0.15" -s machine_min_cool_heat_time_window="50.0" -s spaghetti_infill_extra_volume="0" -s xy_offset="0" -s carve_multiple_volumes="False" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="25" -s material_flow="97" -s xy_offset_layer_0="0" -s z_seam_y="870" -s support_interface_extruder_nr="0" -s wireframe_fall_down="0.5" -s default_material_print_temperature="205" -s infill_mesh="False" -s retraction_enable="True" -s skin_outline_count="1" -s ironing_only_highest_layer="False" -s retraction_extrusion_window="3.2" -s speed_support_infill="35" -s retract_at_layer_change="False" -s machine_extruder_count="1" -s ironing_enabled="False" -s retraction_min_travel="1.5" -s speed_ironing="30.0" -s ironing_pattern="zigzag" -s cool_fan_enabled="True" -s cool_fan_speed_min="75" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_enabled="False" -s cool_min_layer_time_fan_speed_max="20" -s ooze_shield_angle="60" -s cool_lift_head="False" -s support_enable="False" -s fill_perimeter_gaps="everywhere" -s support_infill_extruder_nr="0" -s speed_support_bottom="23.333333333333332" -s support_extruder_nr_layer_0="0" -s skirt_line_count="3" -s filter_out_tiny_gaps="True" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.4" -s infill_hollow="False" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s jerk_travel_layer_0="30.0" -s support_bottom_extruder_nr="0" -s support_type="everywhere" -s nozzle_disallowed_areas="[]" -s support_angle="40" -s support_pattern="zigzag" -s support_line_distance="2.0" -s cool_min_layer_time="15" -s wireframe_roof_inset="3" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="1" -s support_xy_overrides_z="z_overrides_xy" -s support_bottom_stair_step_height="0.3" -s support_bottom_stair_step_width="5.0" -s jerk_support_interface="20" -s machine_disallowed_areas="[]" -s acceleration_prime_tower="3000" -s support_infill_sparse_thickness="0.2" -s dual_pre_wipe="True" -s mold_width="5" -s gradual_support_infill_steps="0" -s support_roof_enable="False" -s support_bottom_enable="False" -s retraction_speed="45" -s support_roof_height="1" -s support_interface_skip_height="0.3" -s support_roof_line_distance="0.5" -s support_tree_branch_diameter="2" -s infill_overlap="10" -s support_bottom_line_distance="0.5" -s material="0" -s support_roof_pattern="lines" -s prime_tower_wipe_enabled="True" -s support_tower_diameter="3.0" -s support_join_distance="2.0" -s remove_empty_first_layers="True" -s support_minimal_diameter="3.0" -s infill_mesh_order="0" -s cool_fan_speed_max="100" -s support_mesh_drop_down="True" -s bottom_skin_expand_distance="1.2000000000000002" -s prime_blob_enable="True" -s extruder_prime_pos_y="0" -s support_infill_rate="20" -s adhesion_type="skirt" -s skirt_gap="3" -s support_interface_density="100" -s prime_tower_position_x="285.3" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s support_mesh="False" -s support_xy_distance_overhang="1.25" -s raft_surface_thickness="0.2" -s prime_tower_flow="97" -s raft_interface_thickness="0.30000000000000004" -s z_seam_type="shortest" -s raft_interface_line_width="0.8" -s raft_base_thickness="0.36" -s raft_base_line_spacing="1.6" -s raft_interface_speed="22.5" -s support_offset="0.2" -s raft_base_speed="22.5" -s raft_surface_acceleration="3000" -s platform_adhesion="0" -s speed_print_layer_0="25" -s raft_interface_acceleration="3000" -s raft_base_jerk="20" -s raft_surface_fan_speed="0" -s adaptive_layer_height_variation_step="0.01" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s support_tree_enable="False" -s support_roof_density="100" -s meshfix_union_all="True" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="False" -s mold_enabled="False" -s mold_roof_height="0.5" -s magic_mesh_surface_mode="normal" -s anti_overhang_mesh="False" -s relative_extrusion="False" -s support_tree_angle="40" -s support_tree_collision_resolution="0.2" -s support_tree_wall_count="1" -s retraction_combing="off" -s raft_jerk="20" -s roofing_line_width="0.4" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s infill_offset_y="0" -s roofing_angles="[ ]" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s mesh_position_y="0" -s material_flow_dependent_temperature="False" -s conical_overhang_enabled="False" -s draft_shield_enabled="False" -s draft_shield_height_limitation="full" -s coasting_min_volume="0.8" -s spaghetti_infill_enabled="False" -s spaghetti_max_infill_angle="10" -s speed_topbottom="45.0" -s magic_spiralize="False" -s spaghetti_max_height="2.0" -s spaghetti_flow="20" -s machine_nozzle_head_distance="3" -s support_conical_enabled="False" -s support_conical_angle="30" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s mesh_position_z="0" -s wireframe_height="3" -s prime_tower_wall_thickness="1.0" -s ooze_shield_enabled="False" -s coasting_enable="True" -s wireframe_printspeed_bottom="5" -s wireframe_printspeed_up="5" -s prime_tower_position_y="265.3" -s z_seam_x="145.0" -s raft_surface_speed="30.0" -s wireframe_printspeed_down="5" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s wireframe_flow_flat="100" -s wireframe_flat_delay="0.1" -s wireframe_top_jump="0.6" -s coasting_volume="0.1" -s wireframe_strategy="compensate" -s wireframe_straight_before_down="20" -s print_sequence="all_at_once" -s support_use_towers="True" -s wireframe_roof_fall_down="2" -s speed_slowdown_layers="1" -s material_final_print_temperature="205" -s wireframe_roof_drag_along="0.8" -s wireframe_nozzle_clearance="1" -s meshfix_extensive_stitching="False" -s adaptive_layer_height_variation="0.1" -s speed_support_interface="23.333333333333332" -s adaptive_layer_height_threshold="200.0" -s center_object="False" -s raft_surface_layers="2" -s prime_tower_min_volume="10" -s support_extruder_nr="0" -s support_tree_branch_distance="4" -s expand_skins_expand_distance="1.2000000000000002" -s raft_fan_speed="0" -s acceleration_print="3000" -s jerk_support_infill="20" -s machine_head_with_fans_polygon="[[-20, 10], [-20, -10], [10, 10], [10, -10]]" -s wall_line_width="0.4" -s top_bottom_thickness="0.8" -s infill="0" -s dual="0" -s cool_min_speed="10" -s material_initial_print_temperature="205" -s initial_extruder_nr="0" -g -e0 -s jerk_support_interface="20" -s meshfix_union_all="True" -s coasting_enable="False" -s material_surface_energy="100" -s support_line_width="0.5" -s support_conical_angle="30" -s machine_settings="0" -s support_bottom_stair_step_width="5.0" -s spaghetti_flow="20" -s raft_surface_speed="30.0" -s xy_offset="0" -s raft_surface_acceleration="3000" -s max_skin_angle_for_expansion="90" -s speed_ironing="20.0" -s support_bottom_height="1" -s acceleration_support_bottom="3000" -s support_bottom_density="100" -s infill_line_distance="6.666666666666667" -s optimize_wall_printing_order="False" -s raft_base_jerk="20" -s z_seam_y="870" -s meshfix_union_all_remove_holes="False" -s support_roof_enable="False" -s travel="0" -s retraction_extrusion_window="3.2" -s blackmagic="0" -s xy_offset_layer_0="0" -s jerk_wall_x="20" -s support_tree_wall_thickness="0.5" -s jerk_support_bottom="20" -s raft_speed="30.0" -s center_object="False" -s cool_fan_speed_0="0" -s speed="0" -s layer_start_x="0.0" -s roofing_angles="[ ]" -s acceleration_travel_layer_0="5000.0" -s material_flow="100" -s retraction_prime_speed="45" -s roofing_layer_count="0" -s machine_nozzle_head_distance="3" -s prime_tower_line_width="0.5" -s acceleration_wall="3000" -s support_tower_diameter="3.0" -s z_seam_corner="z_seam_corner_inner" -s cool_fan_speed_min="75" -s infill_offset_y="0" -s material_print_temperature_layer_0="215" -s extruder_prime_pos_abs="False" -s material="0" -s default_material_print_temperature="210" -s acceleration_print_layer_0="3000" -s dual_pre_wipe="True" -s support_line_distance="2.5" -s retraction_min_travel="1.0" -s support="0" -s support_bottom_stair_step_height="0.3" -s support_bottom_enable="False" -s speed_infill="60" -s retraction_speed="45" -s retraction_amount="3.2" -s speed_prime_tower="60" -s top_thickness="0.8" -s skirt_gap="3" -s jerk_support_infill="20" -s bottom_skin_preshrink="1.0" -s support_xy_distance_overhang="1.25" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_interface_acceleration="3000" -s raft_surface_layers="2" -s fill_outline_gaps="True" -s ironing_flow="10.0" -s top_layers="4" -s machine_nozzle_temp_enabled="True" -s alternate_extra_perimeter="False" -s skirt_brim_speed="30.0" -s retraction_hop="1" -s prime_blob_enable="True" -s material_extrusion_cool_down_speed="0.7" -s roofing_line_width="0.5" -s line_width="0.5" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s bottom_thickness="0.8" -s support_infill_rate="20" -s jerk_support="20" -s speed_support_roof="23.333333333333332" -s infill_enable_travel_optimization="False" -s mold_roof_height="0.5" -s acceleration_topbottom="3000" -s raft_interface_speed="22.5" -s speed_equalize_flow_max="150" -s raft_base_line_spacing="2.0" -s switch_extruder_retraction_amount="16" -s switch_extruder_retraction_speeds="20" -s acceleration_support_infill="3000" -s support_skip_zag_per_mm="20" -s filter_out_tiny_gaps="True" -s raft_surface_fan_speed="0" -s cross_infill_apply_pockets_alternatingly="True" -s infill_angles="[ ]" -s meshfix_maximum_resolution="0.01" -s support_roof_line_width="0.5" -s material_standby_temperature="175" -s support_tower_roof_angle="65" -s gradual_infill_steps="0" -s acceleration_infill="3000" -s skin_outline_count="1" -s cool_fan_full_at_height="0.3" -s cool_lift_head="False" -s infill_overlap="10" -s skin_preshrink="1.0" -s retraction_hop_enabled="True" -s acceleration_support="3000" -s meshfix="0" -s ironing_only_highest_layer="False" -s cool_min_speed="5" -s support_bottom_pattern="lines" -s support_bottom_line_width="0.5" -s cool_fan_full_layer="3" -s speed_travel="120" -s support_xy_overrides_z="z_overrides_xy" -s speed_travel_layer_0="60.0" -s speed_support="35" -s experimental="0" -s top_skin_expand_distance="1.0" -s raft_interface_thickness="0.30000000000000004" -s machine_nozzle_cool_down_speed="2.0" -s raft_interface_line_width="1.0" -s support_z_distance="0.15" -s bottom_layers="4" -s cool_fan_enabled="True" -s magic_fuzzy_skin_point_dist="0.8" -s retraction_count_max="90" -s travel_avoid_other_parts="True" -s slicing_tolerance="middle" -s travel_avoid_distance="0.625" -s cross_infill_pocket_size="6.666666666666667" -s material_final_print_temperature="215" -s layer_0_z_overlap="0.15" -s support_conical_enabled="False" -s brim_width="8.0" -s acceleration_wall_x="3000" -s dual="0" -s machine_filament_park_distance="16" -s skin_overlap="5" -s jerk_support_roof="20" -s support_roof_pattern="lines" -s zig_zaggify_infill="True" -s expand_skins_expand_distance="1.0" -s bottom_skin_expand_distance="1.0" -s brim_outside_only="True" -s support_bottom_line_distance="0.5" -s wall_line_width_0="0.5" -s skin_alternate_rotation="False" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill="0" -s wall_0_wipe_dist="0.25" -s wall_line_width="0.5" -s coasting_volume="0.1" -s machine_nozzle_tip_outer_diameter="1" -s ironing_line_spacing="0.1" -s infill_wipe_dist="0.125" -s jerk_travel="30" -s speed_layer_0="30.0" -s prime_tower_min_volume="10" -s support_zag_skip_count="8" -s jerk_topbottom="20" -s magic_fuzzy_skin_point_density="1.25" -s material_print_temperature="210" -s top_bottom_pattern="lines" -s cool_fan_speed_max="100" -s gradual_support_infill_steps="0" -s extruder_prime_pos_y="0" -s machine_extruder_end_pos_x="0" -s roofing_pattern="lines" -s raft_surface_thickness="0.2" -s travel_compensate_overlapping_walls_enabled="True" -s infill_before_walls="False" -s support_minimal_diameter="3.0" -s speed_topbottom="30.0" -s machine_nozzle_offset_x="0" -s top_skin_preshrink="1.0" -s machine_heat_zone_length="16" -s shell="0" -s prime_tower_flow="100" -s sub_div_rad_add="0.5" -s gradual_support_infill_step_height="1" -s ironing_inset="0.25" -s acceleration_roofing="3000" -s top_bottom_pattern_0="lines" -s spaghetti_max_height="2.0" -s machine_extruder_end_pos_y="0" -s support_interface_skip_height="0.3" -s wall_line_width_x="0.5" -s raft_surface_line_width="0.5" -s layer_start_y="0.0" -s material_initial_print_temperature="215" -s raft_fan_speed="0" -s raft_base_fan_speed="0" -s support_roof_density="100" -s magic_mesh_surface_mode="normal" -s machine_nozzle_size="0.5" -s wall_thickness="0.8" -s switch_extruder_retraction_speed="20" -s extruder_nr="0" -s support_xy_distance="1" -s raft_interface_line_spacing="1.2" -s outer_inset_first="False" -s infill_overlap_mm="0.05" -s acceleration_prime_tower="3000" -s mold_enabled="False" -s material_flow_dependent_temperature="False" -s machine_extruder_start_pos_abs="False" -s support_top_distance="0.15" -s fill_perimeter_gaps="everywhere" -s raft_base_line_width="1.0" -s z_seam_x="145.0" -s support_tree_collision_resolution="0.25" -s support_join_distance="2.0" -s material_diameter="1.75" -s top_bottom_thickness="0.8" -s acceleration_print="3000" -s infill_sparse_thickness="0.2" -s raft_surface_line_spacing="0.5" -s skirt_line_count="3" -s infill_hollow="False" -s machine_nozzle_offset_y="0" -s raft_margin="15" -s cool_min_layer_time="15" -s wall_line_count="2" -s support_tree_wall_count="1" -s raft_jerk="20" -s speed_wall="30.0" -s speed_wall_0="30.0" -s jerk_prime_tower="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s acceleration_skirt_brim="3000" -s support_tree_branch_distance="4" -s multiple_mesh_overlap="0.15" -s raft_surface_jerk="20" -s acceleration_travel="5000" -s raft_base_thickness="0.36" -s jerk_print_layer_0="20" -s speed_support_interface="23.333333333333332" -s acceleration_layer_0="3000" -s min_skin_width_for_expansion="4.898587196589413e-17" -s z_seam_relative="False" -s jerk_skirt_brim="20" -s machine_extruder_start_pos_y="0" -s support_interface_enable="False" -s support_pattern="zigzag" -s machine_extruder_start_pos_x="0" -s cool_min_layer_time_fan_speed_max="20" -s initial_layer_line_width_factor="100.0" -s jerk_travel_layer_0="30.0" -s min_infill_area="0" -s cool_fan_speed="100.0" -s infill_pattern="grid" -s coasting_speed="90" -s resolution="0" -s skin_line_width="0.5" -s raft_interface_jerk="20" -s raft_base_speed="22.5" -s speed_support_bottom="23.333333333333332" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s extruder_prime_pos_x="0" -s retraction_retract_speed="45" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s spaghetti_max_infill_angle="10" -s ironing_enabled="False" -s raft_acceleration="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s spaghetti_infill_stepped="True" -s support_offset="0.2" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s support_tree_branch_diameter="2" -s support_roof_line_distance="0.5" -s mold_width="5" -s support_infill_sparse_thickness="0.2" -s magic_fuzzy_skin_thickness="0.3" -s mold_angle="40" -s skin_overlap_mm="0.025" -s speed_equalize_flow_enabled="False" -s support_roof_height="1" -s support_interface_pattern="lines" -s infill_sparse_density="15" -s acceleration_support_roof="3000" -s machine_extruder_end_pos_abs="False" -s z_seam_type="sharpest_corner" -s wall_0_inset="0" -s cooling="0" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s prime_tower_purge_volume="0" -s raft_airgap="0.3" -s speed_wall_x="60.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s retraction_hop_after_extruder_switch="True" -s spaghetti_infill_enabled="False" -s skin_angles="[ ]" -s jerk_infill="20" -s jerk_print="20" -s support_interface_height="1" -s spaghetti_inset="0.2" -s support_connect_zigzags="True" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s prime_tower_wipe_enabled="True" -s support_use_towers="True" -s conical_overhang_angle="50" -s raft_smoothing="5" -s jerk_wall="20" -s speed_support_infill="35" -s skirt_brim_minimal_length="200" -s platform_adhesion="0" -s jerk_wall_0="20" -s skirt_brim_line_width="0.5" -s support_interface_line_width="0.5" -s brim_line_count="3" -s material_adhesion_tendency="10" -s support_tree_branch_diameter_angle="5" -s support_conical_min_width="5.0" -s machine_nozzle_id="unknown" -s jerk_layer_0="20" -s retract_at_layer_change="False" -s speed_print="60" -s speed_roofing="30.0" -s skin_no_small_gaps_heuristic="True" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_0="3000" -s jerk_ironing="20" -s retraction_enable="True" -s max_feedrate_z_override="500" -s mesh_position_z="0" -s retraction_extra_prime_amount="0" -s mesh_position_y="0" -s support_tree_angle="40" -s spaghetti_infill_extra_volume="0" -s machine_min_cool_heat_time_window="50.0" -s speed_print_layer_0="30.0" -s infill_line_width="0.5" -s meshfix_extensive_stitching="False" -s coasting_min_volume="0.8" -s support_angle="40" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s command_line_settings="0" -e0 -l "0"
2018-03-20 08:20:02,170 - DEBUG - [(1964)-Thread-13] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] There are empty layers (or layers with empty extruder plans) in the print! Temperature control and cross layer travel moves might suffer.
2018-03-20 08:20:02,561 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [582]: Slicing took 2.9428465366363525 seconds
2018-03-20 08:20:02,562 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [591]: See if there is more to slice…
2018-03-20 08:20:02,564 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2018-03-20 08:20:02,565 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2018-03-20 08:20:02,566 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2018-03-20 08:20:02,567 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [722]: Backend quit with return code 0. Resetting process and socket.
2018-03-20 08:20:04,283 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [356]: Attempting to connect to printer with serial COM5 on baud rate 9600
2018-03-20 08:20:04,610 - INFO - [(11228)-MainThread] cura.CuraApplication.deleteAll [1052]: Clearing scene
2018-03-20 08:20:04,616 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
2018-03-20 08:20:05,144 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.0020020008087158203 seconds
2018-03-20 08:20:05,558 - DEBUG - [(11228)-MainThread] cura.Settings.MachineManager._checkStacksHaveErrors [423]: Checking 2 stacks for errors took 0.31 s
2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
2018-03-20 08:20:06,137 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [218]: Build plate 0 has no objects to be sliced, skipping
2018-03-20 08:20:08,744 - DEBUG - [(14864)-Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [421]: Calculating normals took 0.0 seconds
2018-03-20 08:20:08,745 - DEBUG - [(14864)-Thread-3] STLReader.STLReader.read [79]: Loaded a mesh with 3018 vertices
2018-03-20 08:20:08,759 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.012011051177978516 seconds. 27 input vertices. 27 output vertices.
2018-03-20 08:20:08,762 - DEBUG - [(14864)-Thread-3] UM.FileHandler.ReadFileJob.run [68]: Loading file took 0.0 seconds
2018-03-20 08:20:08,781 - DEBUG - [(14864)-Thread-3] UM.Mesh.MeshData.approximateConvexHull [388]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.018017292022705078 seconds. 27 input vertices. 27 output vertices.
2018-03-20 08:20:08,794 - WARNING - [(11228)-MainThread] UM.Qt.QtApplication.__onQmlWarning [267]: file:///C:/Program Files/Ultimaker Cura 3.2/qml/QtQuick/Controls/TextField.qml:638:5: QML TextInputWithHandles: Binding loop detected for property "text"
2018-03-20 08:20:09,215 - DEBUG - [(11228)-MainThread] UM.Mesh.MeshData.calculateNormalsFromIndexedVertices [444]: Calculating normals took 0.003002643585205078 seconds
2018-03-20 08:20:09,353 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [197]: starting to slice!
2018-03-20 08:20:09,354 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend.slice [214]: Going to slice build plate [0]!
2018-03-20 08:20:09,356 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2018-03-20 08:20:09,366 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2018-03-20 08:20:09,421 - INFO - [(11228)-MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe
2018-03-20 08:20:09,425 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._backendLog [90]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.2\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.2\resources\definitions\fdmprinter.def.json', '']
2018-03-20 08:20:09,478 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:20:09,481 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] Cura_SteamEngine version DEV
2018-03-20 08:20:09,495 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2018-03-20 08:20:09,497 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] Copyright (C) 2017 Ultimaker
2018-03-20 08:20:09,639 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:20:09,642 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2018-03-20 08:20:09,666 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] This program is free software: you can redistribute it and/or modify
2018-03-20 08:20:09,752 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-03-20 08:20:09,768 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-03-20 08:20:09,777 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] (at your option) any later version.
2018-03-20 08:20:09,805 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:20:09,823 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] This program is distributed in the hope that it will be useful,
2018-03-20 08:20:09,871 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-03-20 08:20:09,930 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-03-20 08:20:10,020 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] GNU Affero General Public License for more details.
2018-03-20 08:20:10,089 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend]
2018-03-20 08:20:10,120 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-03-20 08:20:10,171 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2018-03-20 08:20:10,843 - ERROR - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice._connect [394]: Baud rate detection for COM5 failed
2018-03-20 08:20:10,844 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [408]: Closing the USB printer connection.
2018-03-20 08:20:10,846 - DEBUG - [(15140)-Thread-9] USBPrinting.USBPrinterOutputDevice.close [413]: PrinterConnection.close: cannot join current thread (expected)
2018-03-20 08:20:10,849 - WARNING - [(11228)-MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [126]: Could not find output device with id COM5 to remove
2018-03-20 08:20:11,647 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [381]: Sending slice message took 2.2932746410369873 seconds
2018-03-20 08:20:11,834 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_bed_temperature to 60.0
2018-03-20 08:20:11,836 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting initial_extruder_nr to 0
2018-03-20 08:20:11,838 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting print_temperature to 205
2018-03-20 08:20:11,842 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting time to 08:20:09
2018-03-20 08:20:11,843 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting day to Tue
2018-03-20 08:20:11,844 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] Setting an unregistered setting date to 20-03-2018
2018-03-20 08:20:11,845 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] -s wireframe_flow="100" -s machine_settings="0" -s date="20-03-2018" -s max_skin_angle_for_expansion="90" -s support_bottom_density="100" -s cooling="0" -s support_tree_wall_thickness="0.4" -s raft_speed="30.0" -s meshfix="0" -s speed="0" -s speed_wall="40.0" -s acceleration_wall="3000" -s wireframe_printspeed="5" -s support_skip_zag_per_mm="20" -s travel_compensate_overlapping_walls_enabled="True" -s experimental="0" -s top_thickness="0.8" -s line_width="0.4" -s bottom_thickness="0.8" -s switch_extruder_retraction_speeds="20" -s command_line_settings="0" -s jerk_print="20" -s machine_head_polygon="[[-1, 1], [-1, -1], [1, -1], [1, 1]]" -s jerk_layer_0="20" -s time="08:20:09" -s wall_extruder_nr="-1" -s speed_support="35" -s brim_width="8.0" -s jerk_wall="20" -s raft_acceleration="3000" -s support_interface_pattern="lines" -s support_interface_line_width="0.4" -s infill_sparse_density="15" -s print_temperature="205" -s resolution="0" -s skin_overlap="5" -s skin_preshrink="1.2000000000000002" -s support_z_distance="0.15" -s support_interface_enable="False" -s shell="0" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop_only_when_collides="False" -s start_layers_at_same_position="False" -s jerk_prime_tower="20" -s travel_avoid_other_parts="True" -s jerk_support_roof="20" -s jerk_print_layer_0="20" -s material_print_temp_prepend="True" -s jerk_travel="30" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s jerk_wall_x="20" -s speed_layer_0="25" -s jerk_wall_0="20" -s machine_max_jerk_e="5.0" -s jerk_enabled="False" -s blackmagic="0" -s acceleration_support_roof="3000" -s prime_tower_enable="False" -s acceleration_wall_x="3000" -s support_bottom_line_width="0.5" -s max_feedrate_z_override="0" -s skirt_brim_minimal_length="200" -s raft_smoothing="5" -s cool_fan_full_at_height="0.3" -s conical_overhang_angle="50" -s skin_no_small_gaps_heuristic="True" -s speed_print="60" -s layer_start_x="0.0" -s speed_wall_x="50.0" -s speed_wall_0="45.0" -s speed_infill="60" -s switch_extruder_retraction_amount="16" -s spaghetti_infill_stepped="True" -s prime_tower_size="20" -s retraction_retract_speed="45" -s machine_nozzle_heat_up_speed="2.0" -s extruder_prime_pos_x="0" -s acceleration_support_interface="3000" -s print_bed_temperature="60.0" -s material_surface_energy="100" -s travel_avoid_distance="0.625" -s jerk_ironing="20" -s retraction_extra_prime_amount="0" -s cross_infill_pocket_size="8.0" -s material_print_temperature_layer_0="205" -s material_print_temperature="205" -s jerk_topbottom="20" -s draft_shield_height="10" -s min_skin_width_for_expansion="1.2246467991473532e-16" -s flow_rate_extrusion_offset_factor="100" -s speed_travel_layer_0="250" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="1.2000000000000002" -s bottom_skin_preshrink="1.2000000000000002" -s extruder_prime_pos_abs="False" -s top_skin_preshrink="1.2000000000000002" -s adhesion_extruder_nr="0" -s infill_before_walls="False" -s gradual_infill_steps="0" -s infill_sparse_thickness="0.2" -s retraction_hop_enabled="True" -s layer_start_y="0.0" -s wireframe_flow_connection="100" -s skin_overlap_mm="0.02" -s speed_equalize_flow_enabled="False" -s mold_angle="40" -s acceleration_layer_0="3000" -s machine_start_gcode="G28 ;Home
2018-03-20 08:20:11,846 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 Z15.0 F6000 ;Move the platform down 15mm
2018-03-20 08:20:11,847 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] ;Prime the extruder
2018-03-20 08:20:11,849 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0
2018-03-20 08:20:11,850 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 F200 E3
2018-03-20 08:20:11,851 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E0" -s wireframe_up_half_speed="0.3" -s machine_firmware_retract="False" -s infill_overlap_mm="0.04" -s outer_inset_first="False" -s raft_interface_line_spacing="1.0" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s infill_angles="[ ]" -s cross_infill_apply_pockets_alternatingly="True" -s zig_zaggify_infill="True" -s acceleration_topbottom="3000" -s material_extrusion_cool_down_speed="0.7" -s infill_pattern="cubic" -s support_tower_roof_angle="65" -s adaptive_layer_height_enabled="False" -s material_adhesion_tendency="10" -s machine_max_feedrate_x="500" -s travel_compensate_overlapping_walls_0_enabled="True" -s support="0" -s material_bed_temp_prepend="True" -s support_bottom_pattern="lines" -s machine_depth="290" -s speed_support_roof="23.333333333333332" -s wireframe_top_delay="0" -s acceleration_skirt_brim="3000" -s optimize_wall_printing_order="False" -s retraction_hop="1" -s machine_max_feedrate_z="5" -s acceleration_travel_layer_0="5000.0" -s layer_height="0.2" -s prime_tower_purge_volume="0" -s sub_div_rad_add="0.4" -s support_roof_line_width="0.5" -s machine_max_feedrate_y="500" -s meshfix_maximum_resolution="0.01" -s machine_max_acceleration_y="9000" -s machine_show_variants="False" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s machine_nozzle_size="0.4" -s speed_prime_tower="60" -s machine_heat_zone_length="16" -s support_zag_skip_count="10" -s cutting_mesh="False" -s roofing_layer_count="0" -s wireframe_drag_along="0.6" -s machine_heated_bed="True" -s roofing_extruder_nr="-1" -s switch_extruder_retraction_speed="20" -s gantry_height="99999999999" -s ironing_inset="0.2" -s layer_0_z_overlap="0.15" -s wireframe_bottom_delay="0" -s acceleration_wall_0="3000" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s retraction_prime_speed="45" -s machine_nozzle_temp_enabled="True" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s machine_width="290" -s top_layers="10" -s day="Tue" -s material_bed_temperature_layer_0="60.0" -s machine_max_acceleration_e="10000" -s support_bottom_height="1" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s machine_nozzle_id="unknown" -s layer_height_0="0.3" -s support_conical_min_width="5.0" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_travel="5000" -s raft_surface_jerk="20" -s multiple_mesh_overlap="0.15" -s material_diameter="1.75" -s top_bottom_extruder_nr="-1" -s machine_max_acceleration_z="100" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill_wipe_dist="0.1" -s machine_nozzle_tip_outer_diameter="1" -s wall_thickness="0.8" -s min_infill_area="0" -s machine_height="540" -s support_connect_zigzags="True" -s wall_x_extruder_nr="-1" -s brim_outside_only="True" -s infill_line_distance="8.0" -s machine_end_gcode="M104 S0
2018-03-20 08:20:11,852 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] M140 S0
2018-03-20 08:20:11,853 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] ;Retract the filament
2018-03-20 08:20:11,854 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G92 E1
2018-03-20 08:20:11,855 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G1 E-1 F300
2018-03-20 08:20:11,856 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] G28 X0 Y0
2018-03-20 08:20:11,857 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] M84" -s skirt_brim_line_width="0.4" -s acceleration_support="3000" -s brim_line_count="3" -s machine_max_acceleration_x="9000" -s slicing_tolerance="middle" -s ooze_shield_dist="2" -s ironing_flow="10.0" -s infill_line_width="0.4" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s acceleration_print_layer_0="3000" -s speed_roofing="45.0" -s material_standby_temperature="150" -s infill_extruder_nr="-1" -s skin_angles="[ ]" -s jerk_infill="20" -s acceleration_infill="3000" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s jerk_skirt_brim="20" -s z_seam_relative="False" -s machine_shape="elliptic" -s cool_fan_speed="100.0" -s speed_travel="400" -s alternate_carve_order="True" -s spaghetti_inset="0.2" -s cool_fan_full_layer="3" -s retraction_count_max="90" -s magic_fuzzy_skin_point_dist="0.8" -s material_bed_temp_wait="True" -s bottom_layers="10" -s machine_max_jerk_xy="20.0" -s wall_line_width_0="0.4" -s acceleration_enabled="False" -s skin_alternate_rotation="False" -s material_bed_temperature="60.0" -s prime_tower_line_width="0.4" -s machine_gcode_flavor="RepRap (RepRap)" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="True" -s travel="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_wait="True" -s wall_line_count="3" -s machine_minimum_feedrate="0.0" -s machine_name="Unknown" -s wall_line_width_x="0.4" -s raft_surface_line_width="0.4" -s wall_0_wipe_dist="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s support_line_width="0.4" -s machine_acceleration="4000" -s wall_0_inset="0" -s machine_center_is_zero="True" -s smooth_spiralized_contours="True" -s skin_line_width="0.4" -s raft_interface_jerk="20" -s retraction_amount="3.2" -s machine_max_jerk_z="0.4" -s z_seam_corner="z_seam_corner_inner" -s machine_max_feedrate_e="299792458000" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_base_line_width="0.8" -s support_top_distance="0.15" -s machine_min_cool_heat_time_window="50.0" -s spaghetti_infill_extra_volume="0" -s xy_offset="0" -s carve_multiple_volumes="False" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="25" -s material_flow="97" -s xy_offset_layer_0="0" -s z_seam_y="870" -s support_interface_extruder_nr="0" -s wireframe_fall_down="0.5" -s default_material_print_temperature="205" -s infill_mesh="False" -s retraction_enable="True" -s skin_outline_count="1" -s ironing_only_highest_layer="False" -s retraction_extrusion_window="3.2" -s speed_support_infill="35" -s retract_at_layer_change="False" -s machine_extruder_count="1" -s ironing_enabled="False" -s retraction_min_travel="1.5" -s speed_ironing="30.0" -s ironing_pattern="zigzag" -s cool_fan_enabled="True" -s cool_fan_speed_min="75" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_enabled="False" -s cool_min_layer_time_fan_speed_max="20" -s ooze_shield_angle="60" -s cool_lift_head="False" -s support_enable="False" -s fill_perimeter_gaps="everywhere" -s support_infill_extruder_nr="0" -s speed_support_bottom="23.333333333333332" -s support_extruder_nr_layer_0="0" -s skirt_line_count="3" -s filter_out_tiny_gaps="True" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.4" -s infill_hollow="False" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s jerk_travel_layer_0="30.0" -s support_bottom_extruder_nr="0" -s support_type="everywhere" -s nozzle_disallowed_areas="[]" -s support_angle="40" -s support_pattern="zigzag" -s support_line_distance="2.0" -s cool_min_layer_time="15" -s wireframe_roof_inset="3" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="1" -s support_xy_overrides_z="z_overrides_xy" -s support_bottom_stair_step_height="0.3" -s support_bottom_stair_step_width="5.0" -s jerk_support_interface="20" -s machine_disallowed_areas="[]" -s acceleration_prime_tower="3000" -s support_infill_sparse_thickness="0.2" -s dual_pre_wipe="True" -s mold_width="5" -s gradual_support_infill_steps="0" -s support_roof_enable="False" -s support_bottom_enable="False" -s retraction_speed="45" -s support_roof_height="1" -s support_interface_skip_height="0.3" -s support_roof_line_distance="0.5" -s support_tree_branch_diameter="2" -s infill_overlap="10" -s support_bottom_line_distance="0.5" -s material="0" -s support_roof_pattern="lines" -s prime_tower_wipe_enabled="True" -s support_tower_diameter="3.0" -s support_join_distance="2.0" -s remove_empty_first_layers="True" -s support_minimal_diameter="3.0" -s infill_mesh_order="0" -s cool_fan_speed_max="100" -s support_mesh_drop_down="True" -s bottom_skin_expand_distance="1.2000000000000002" -s prime_blob_enable="True" -s extruder_prime_pos_y="0" -s support_infill_rate="20" -s adhesion_type="skirt" -s skirt_gap="3" -s support_interface_density="100" -s prime_tower_position_x="285.3" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s support_mesh="False" -s support_xy_distance_overhang="1.25" -s raft_surface_thickness="0.2" -s prime_tower_flow="97" -s raft_interface_thickness="0.30000000000000004" -s z_seam_type="shortest" -s raft_interface_line_width="0.8" -s raft_base_thickness="0.36" -s raft_base_line_spacing="1.6" -s raft_interface_speed="22.5" -s support_offset="0.2" -s raft_base_speed="22.5" -s raft_surface_acceleration="3000" -s platform_adhesion="0" -s speed_print_layer_0="25" -s raft_interface_acceleration="3000" -s raft_base_jerk="20" -s raft_surface_fan_speed="0" -s adaptive_layer_height_variation_step="0.01" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s support_tree_enable="False" -s support_roof_density="100" -s meshfix_union_all="True" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="False" -s mold_enabled="False" -s mold_roof_height="0.5" -s magic_mesh_surface_mode="normal" -s anti_overhang_mesh="False" -s relative_extrusion="False" -s support_tree_angle="40" -s support_tree_collision_resolution="0.2" -s support_tree_wall_count="1" -s retraction_combing="off" -s raft_jerk="20" -s roofing_line_width="0.4" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s infill_offset_y="0" -s roofing_angles="[ ]" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s mesh_position_y="0" -s material_flow_dependent_temperature="False" -s conical_overhang_enabled="False" -s draft_shield_enabled="False" -s draft_shield_height_limitation="full" -s coasting_min_volume="0.8" -s spaghetti_infill_enabled="False" -s spaghetti_max_infill_angle="10" -s speed_topbottom="45.0" -s magic_spiralize="False" -s spaghetti_max_height="2.0" -s spaghetti_flow="20" -s machine_nozzle_head_distance="3" -s support_conical_enabled="False" -s support_conical_angle="30" -s jerk_support_bottom="20" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s mesh_position_z="0" -s wireframe_height="3" -s prime_tower_wall_thickness="1.0" -s ooze_shield_enabled="False" -s coasting_enable="True" -s wireframe_printspeed_bottom="5" -s wireframe_printspeed_up="5" -s prime_tower_position_y="265.3" -s z_seam_x="145.0" -s raft_surface_speed="30.0" -s wireframe_printspeed_down="5" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s wireframe_flow_flat="100" -s wireframe_flat_delay="0.1" -s wireframe_top_jump="0.6" -s coasting_volume="0.1" -s wireframe_strategy="compensate" -s wireframe_straight_before_down="20" -s print_sequence="all_at_once" -s support_use_towers="True" -s wireframe_roof_fall_down="2" -s speed_slowdown_layers="1" -s material_final_print_temperature="205" -s wireframe_roof_drag_along="0.8" -s wireframe_nozzle_clearance="1" -s meshfix_extensive_stitching="False" -s adaptive_layer_height_variation="0.1" -s speed_support_interface="23.333333333333332" -s adaptive_layer_height_threshold="200.0" -s center_object="False" -s raft_surface_layers="2" -s prime_tower_min_volume="10" -s support_extruder_nr="0" -s support_tree_branch_distance="4" -s expand_skins_expand_distance="1.2000000000000002" -s raft_fan_speed="0" -s acceleration_print="3000" -s jerk_support_infill="20" -s machine_head_with_fans_polygon="[[-20, 10], [-20, -10], [10, 10], [10, -10]]" -s wall_line_width="0.4" -s top_bottom_thickness="0.8" -s infill="0" -s dual="0" -s cool_min_speed="10" -s material_initial_print_temperature="205" -s initial_extruder_nr="0" -g -e0 -s jerk_support_interface="20" -s meshfix_union_all="True" -s coasting_enable="False" -s material_surface_energy="100" -s support_line_width="0.5" -s support_conical_angle="30" -s machine_settings="0" -s support_bottom_stair_step_width="5.0" -s spaghetti_flow="20" -s raft_surface_speed="30.0" -s xy_offset="0" -s raft_surface_acceleration="3000" -s max_skin_angle_for_expansion="90" -s speed_ironing="30.0" -s support_bottom_height="1" -s acceleration_support_bottom="3000" -s support_bottom_density="100" -s infill_line_distance="10.0" -s optimize_wall_printing_order="False" -s raft_base_jerk="20" -s z_seam_y="870" -s meshfix_union_all_remove_holes="False" -s support_roof_enable="False" -s travel="0" -s retraction_extrusion_window="3.2" -s blackmagic="0" -s xy_offset_layer_0="0" -s jerk_wall_x="20" -s support_tree_wall_thickness="0.5" -s jerk_support_bottom="20" -s raft_speed="30.0" -s center_object="False" -s cool_fan_speed_0="0" -s speed="0" -s layer_start_x="0.0" -s roofing_angles="[ ]" -s acceleration_travel_layer_0="5000.0" -s material_flow="100" -s retraction_prime_speed="45" -s roofing_layer_count="0" -s machine_nozzle_head_distance="3" -s prime_tower_line_width="0.5" -s acceleration_wall="3000" -s support_tower_diameter="3.0" -s z_seam_corner="z_seam_corner_inner" -s cool_fan_speed_min="75" -s infill_offset_y="0" -s material_print_temperature_layer_0="205" -s extruder_prime_pos_abs="False" -s material="0" -s default_material_print_temperature="205" -s acceleration_print_layer_0="3000" -s dual_pre_wipe="True" -s support_line_distance="2.5" -s retraction_min_travel="1.5" -s support="0" -s support_bottom_stair_step_height="0.3" -s support_bottom_enable="False" -s speed_infill="60" -s retraction_speed="45" -s retraction_amount="3.2" -s speed_prime_tower="60" -s top_thickness="0.8" -s skirt_gap="3" -s jerk_support_infill="20" -s bottom_skin_preshrink="1.5" -s support_xy_distance_overhang="1.25" -s travel_compensate_overlapping_walls_x_enabled="True" -s raft_interface_acceleration="3000" -s raft_surface_layers="2" -s fill_outline_gaps="True" -s ironing_flow="10.0" -s top_layers="5" -s machine_nozzle_temp_enabled="True" -s alternate_extra_perimeter="False" -s skirt_brim_speed="25" -s retraction_hop="1" -s prime_blob_enable="True" -s material_extrusion_cool_down_speed="0.7" -s roofing_line_width="0.5" -s line_width="0.5" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s bottom_thickness="0.8" -s support_infill_rate="20" -s jerk_support="20" -s speed_support_roof="23.333333333333332" -s infill_enable_travel_optimization="False" -s mold_roof_height="0.5" -s acceleration_topbottom="3000" -s raft_interface_speed="22.5" -s speed_equalize_flow_max="150" -s raft_base_line_spacing="2.0" -s switch_extruder_retraction_amount="16" -s switch_extruder_retraction_speeds="20" -s acceleration_support_infill="3000" -s support_skip_zag_per_mm="20" -s filter_out_tiny_gaps="True" -s raft_surface_fan_speed="0" -s cross_infill_apply_pockets_alternatingly="True" -s infill_angles="[ ]" -s meshfix_maximum_resolution="0.01" -s support_roof_line_width="0.5" -s material_standby_temperature="175" -s support_tower_roof_angle="65" -s gradual_infill_steps="0" -s acceleration_infill="3000" -s skin_outline_count="1" -s cool_fan_full_at_height="0.3" -s cool_lift_head="False" -s infill_overlap="10" -s skin_preshrink="1.5" -s retraction_hop_enabled="True" -s acceleration_support="3000" -s meshfix="0" -s ironing_only_highest_layer="False" -s cool_min_speed="5" -s support_bottom_pattern="lines" -s support_bottom_line_width="0.5" -s cool_fan_full_layer="3" -s speed_travel="400" -s support_xy_overrides_z="z_overrides_xy" -s speed_travel_layer_0="250" -s speed_support="35" -s experimental="0" -s top_skin_expand_distance="1.5" -s raft_interface_thickness="0.30000000000000004" -s machine_nozzle_cool_down_speed="2.0" -s raft_interface_line_width="1.0" -s support_z_distance="0.15" -s bottom_layers="5" -s cool_fan_enabled="True" -s magic_fuzzy_skin_point_dist="0.8" -s retraction_count_max="90" -s travel_avoid_other_parts="True" -s slicing_tolerance="middle" -s travel_avoid_distance="0.625" -s cross_infill_pocket_size="10.0" -s material_final_print_temperature="205" -s layer_0_z_overlap="0.15" -s support_conical_enabled="False" -s brim_width="8.0" -s acceleration_wall_x="3000" -s dual="0" -s machine_filament_park_distance="16" -s skin_overlap="5" -s jerk_support_roof="20" -s support_roof_pattern="lines" -s zig_zaggify_infill="True" -s expand_skins_expand_distance="1.5" -s bottom_skin_expand_distance="1.5" -s brim_outside_only="True" -s support_bottom_line_distance="0.5" -s wall_line_width_0="0.5" -s skin_alternate_rotation="False" -s acceleration_ironing="3000" -s extruder_prime_pos_z="0" -s infill="0" -s wall_0_wipe_dist="0.1" -s wall_line_width="0.5" -s coasting_volume="0.1" -s machine_nozzle_tip_outer_diameter="1" -s ironing_line_spacing="0.1" -s infill_wipe_dist="0.125" -s jerk_travel="30" -s speed_layer_0="25" -s prime_tower_min_volume="10" -s support_zag_skip_count="8" -s jerk_topbottom="20" -s magic_fuzzy_skin_point_density="1.25" -s material_print_temperature="205" -s top_bottom_pattern="lines" -s cool_fan_speed_max="100" -s gradual_support_infill_steps="0" -s extruder_prime_pos_y="0" -s machine_extruder_end_pos_x="0" -s roofing_pattern="lines" -s raft_surface_thickness="0.2" -s travel_compensate_overlapping_walls_enabled="True" -s infill_before_walls="False" -s support_minimal_diameter="3.0" -s speed_topbottom="45.0" -s machine_nozzle_offset_x="0" -s top_skin_preshrink="1.5" -s machine_heat_zone_length="16" -s shell="0" -s prime_tower_flow="100" -s sub_div_rad_add="0.5" -s gradual_support_infill_step_height="1" -s ironing_inset="0.25" -s acceleration_roofing="3000" -s top_bottom_pattern_0="lines" -s spaghetti_max_height="2.0" -s machine_extruder_end_pos_y="0" -s support_interface_skip_height="0.3" -s wall_line_width_x="0.5" -s raft_surface_line_width="0.5" -s layer_start_y="0.0" -s material_initial_print_temperature="205" -s raft_fan_speed="0" -s raft_base_fan_speed="0" -s support_roof_density="100" -s magic_mesh_surface_mode="normal" -s machine_nozzle_size="0.5" -s wall_thickness="0.8" -s switch_extruder_retraction_speed="20" -s extruder_nr="0" -s support_xy_distance="1" -s raft_interface_line_spacing="1.2" -s outer_inset_first="False" -s infill_overlap_mm="0.05" -s acceleration_prime_tower="3000" -s mold_enabled="False" -s material_flow_dependent_temperature="False" -s machine_extruder_start_pos_abs="False" -s support_top_distance="0.15" -s fill_perimeter_gaps="everywhere" -s raft_base_line_width="1.0" -s z_seam_x="145.0" -s support_tree_collision_resolution="0.25" -s support_join_distance="2.0" -s material_diameter="1.75" -s top_bottom_thickness="0.8" -s acceleration_print="3000" -s infill_sparse_thickness="0.2" -s raft_surface_line_spacing="0.5" -s skirt_line_count="3" -s infill_hollow="False" -s machine_nozzle_offset_y="0" -s raft_margin="15" -s cool_min_layer_time="15" -s wall_line_count="3" -s support_tree_wall_count="1" -s raft_jerk="20" -s speed_wall="40.0" -s speed_wall_0="45.0" -s jerk_prime_tower="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s acceleration_skirt_brim="3000" -s support_tree_branch_distance="4" -s multiple_mesh_overlap="0.15" -s raft_surface_jerk="20" -s acceleration_travel="5000" -s raft_base_thickness="0.36" -s jerk_print_layer_0="20" -s speed_support_interface="23.333333333333332" -s acceleration_layer_0="3000" -s min_skin_width_for_expansion="6.123233995736766e-17" -s z_seam_relative="False" -s jerk_skirt_brim="20" -s machine_extruder_start_pos_y="0" -s support_interface_enable="False" -s support_pattern="zigzag" -s machine_extruder_start_pos_x="0" -s cool_min_layer_time_fan_speed_max="20" -s initial_layer_line_width_factor="100.0" -s jerk_travel_layer_0="30.0" -s min_infill_area="0" -s cool_fan_speed="100.0" -s infill_pattern="cubic" -s coasting_speed="90" -s resolution="0" -s skin_line_width="0.5" -s raft_interface_jerk="20" -s raft_base_speed="22.5" -s speed_support_bottom="23.333333333333332" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s extruder_prime_pos_x="0" -s retraction_retract_speed="45" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s spaghetti_max_infill_angle="10" -s ironing_enabled="False" -s raft_acceleration="3000" -s magic_fuzzy_skin_enabled="False" -s infill_offset_x="0" -s gradual_infill_step_height="2.0" -s meshfix_keep_open_polygons="False" -s mesh_position_x="0" -s spaghetti_infill_stepped="True" -s support_offset="0.2" -s jerk_roofing="20" -s support_bottom_distance="0.15" -s support_tree_branch_diameter="2" -s support_roof_line_distance="0.5" -s mold_width="5" -s support_infill_sparse_thickness="0.2" -s magic_fuzzy_skin_thickness="0.3" -s mold_angle="40" -s skin_overlap_mm="0.025" -s speed_equalize_flow_enabled="False" -s support_roof_height="1" -s support_interface_pattern="lines" -s infill_sparse_density="15" -s acceleration_support_roof="3000" -s machine_extruder_end_pos_abs="False" -s z_seam_type="sharpest_corner" -s wall_0_inset="0" -s cooling="0" -s raft_interface_fan_speed="0" -s support_skip_some_zags="False" -s prime_tower_purge_volume="0" -s raft_airgap="0.3" -s speed_wall_x="50.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s retraction_hop_after_extruder_switch="True" -s spaghetti_infill_enabled="False" -s skin_angles="[ ]" -s jerk_infill="20" -s jerk_print="20" -s support_interface_height="1" -s spaghetti_inset="0.2" -s support_connect_zigzags="True" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s prime_tower_wipe_enabled="True" -s support_use_towers="True" -s conical_overhang_angle="50" -s raft_smoothing="5" -s jerk_wall="20" -s speed_support_infill="35" -s skirt_brim_minimal_length="200" -s platform_adhesion="0" -s jerk_wall_0="20" -s skirt_brim_line_width="0.5" -s support_interface_line_width="0.5" -s brim_line_count="3" -s material_adhesion_tendency="10" -s support_tree_branch_diameter_angle="5" -s support_conical_min_width="5.0" -s machine_nozzle_id="unknown" -s jerk_layer_0="20" -s retract_at_layer_change="False" -s speed_print="60" -s speed_roofing="45.0" -s skin_no_small_gaps_heuristic="True" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_0="3000" -s jerk_ironing="20" -s retraction_enable="True" -s max_feedrate_z_override="500" -s mesh_position_z="0" -s retraction_extra_prime_amount="0" -s mesh_position_y="0" -s support_tree_angle="40" -s spaghetti_infill_extra_volume="0" -s machine_min_cool_heat_time_window="50.0" -s speed_print_layer_0="25" -s infill_line_width="0.5" -s meshfix_extensive_stitching="False" -s coasting_min_volume="0.8" -s support_angle="40" -s switch_extruder_prime_speed="20" -s raft_base_acceleration="3000" -s command_line_settings="0" -e0 -l "0"
2018-03-20 08:20:12,134 - DEBUG - [(14640)-Thread-16] UM.Backend.Backend._backendLog [90]: [Backend] [WARNING] There are empty layers (or layers with empty extruder plans) in the print! Temperature control and cross layer travel moves might suffer.
2018-03-20 08:20:13,049 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [582]: Slicing took 3.695173978805542 seconds
2018-03-20 08:20:13,050 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [591]: See if there is more to slice…
2018-03-20 08:20:13,052 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2018-03-20 08:20:13,053 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2018-03-20 08:20:13,055 - DEBUG - [(11228)-MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2018-03-20 08:20:13,067 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [722]: Backend quit with return code 0. Resetting process and socket.
2018-03-20 08:20:18,853 - DEBUG - [(11228)-MainThread] AutoSave.AutoSave._onTimeout [71]: Autosaving preferences, instances and profiles
2018-03-20 08:20:22,291 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [144]: Filename set to: A_Semi.gcode
2018-03-20 08:20:22,293 - DEBUG - [(11228)-MainThread] SliceInfoPlugin.SliceInfo._onWriteStarted [66]: 'info/send_slice_info' is turned off.
2018-03-20 08:20:22,294 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [157]: Loading gcode…
2018-03-20 08:20:22,294 - DEBUG - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice.onFilenameAccepted [177]: Connecting…
2018-03-20 08:20:23,526 - ERROR - [(11228)-MainThread] Cura-DuetRRFPlugin-master.DuetRRFOutputDevice._onNetworkError [353]: _onNetworkError: 301
2018-03-20 08:20:29,240 - DEBUG - [(11228)-MainThread] UM.Qt.QtApplication.windowClosed [345]: Shutting down cura
2018-03-20 08:20:29,320 - DEBUG - [(11228)-MainThread] CuraEngineBackend.CuraEngineBackend._terminate [262]: Attempting to kill the engine process
i entered the ip address of the duet on my local wifi network: 172.16.31.76, i also tried \172.16.31.76 still the 301 protocol error.
the cura.log is too large to paste here, i got an 'exceed limit' error, as well as it froze my chrome for a bit…
ill copy and past the last part of the cura.log that has the error in the next reply.
hi, thanks, when i changed the folder name from -0.0.9 to -master, it recognized the plugin… then when i goto upload to duetrrf (after i added the ip address of my artemis) i clicked upload gcoade, and after selecting a filename and clicking, i get 'there was a network error "" 301 protocol is unknown'
thanks as always
marc
hi,thanks resam, ill try to post in appropriate areas.
i dloaded the 0.0.5 version. ill try the latest from your link now.
i dont see it listed when i goto 'plugins' not do i see it under 'extensions' …. (when i ran cura 3.1.0 i had tried this out, and it was there in the extension and the plugins... but when i tried to use it, i got authentication errrors (username, etc...)
ill try the latest first, then look at the cura.log
marc
im using windows 10 pro , and the folders are c:\users\marc\appdata\roaming\cura\3.2\plugins (this is where i placed the unzipped folder)
hi i just tried the latest version, it didnt show up in extensions or in plugins, as well i dont see any file named cura.log to look at..? maybe i should uninstall all cura's and then reboot, clean temp files, and reinstall the cura 3.2.1 fresh, and try tohe plugin...?
hi, im using cura 3.2.1, and i wanted to install the cura to duetRFF plugin, as listed here in this forum (v0.0.5). i placed the unzipped folder in the %user%\appdata\roaming\cura\3.2\plugins folder, with cura closed, then opened cura, and under 'extensions' i dont see it there.?
ideas?
it doesnt seem to be recognizing the files /plugin?
thanks for the support everyone!
marc