hi @CthulhuLabs did you find resolution for this. I have exact same behavior when upgrading from 2.02 to 2.051
also no mechanical issue to be detected

thanks

I got the files from https://github.com/mudcruzr/Duet-Maestro-12864-Menu-Files/releases
Other than renaming main and heat files (BTW also ran with original main & heat files same issue) I have left all files as provided.

thanks

Thanks both
I have tried all combination of E and only with E2 I get the effect shown on img and video. All other values (4,-4,-2) produce no action when selector knob is rotated in either direction or when it is clicked. On E2 click works but selector knob is unable to select a heading so it is stuck and produces that ghosting you see on the image and video.

I set the board originally with firmware 2.02 and this behavior was the same as it is now that I upgraded to 2.05
I connected back to Creality board and both LCD and selector knob behave as designed.

I hope someone can help to resolve this

thank you

Hi
I am unable to resolve this issue where LCD appears to be fully functional but using selector know I am unable to move between sections (image and video attached)

I have Duet Maestro 1.0 board
Firmware 2.05
DWC 2.0.4
I wired EXP1 and EXP2 on Duet to EXP1 and EXP2 on LCD. Using ribbon cable and changing the orientation of the recess slot on LCD

LCD is my original Ender 5 LCD and was fully functional
my config file command:
; Custom settings
M918 P1 E2 ; Enable 12864 LCD with 1 menu item per encoder click

I have tried -4, 4, 2 and -2 and only with 2 i have some function with other para no function when selecting or moving selector knob.

What am I missing

Link to video: https://we.tl/t-EwDc209WlB
Thanks