Still having this issue and I can't seem to find a resolution anywhere, any thoughts anyone?

Thanks, I unchecked it just now but I've definitely tried that before and it didn't seem to change things. I can provide my fff file if that would help.

Re: Job status by filament usage

Sorry I was away for a bit and getting things settled with a new job. I'm running the V2.05 firmware on the duetwifi and slicing with Simplify3D V4.1.2. I still haven't quite figured out what's going wrong with the job status by filament usage, and the 'used' filament ends up in the negative much of the time. Here's a screen shot of the web interface:

And here is the gcode file that was used:
RearLightMount.gcode

If I can provide any more details that would help, please let me know. Thanks for the help @dc42

I also have this issue. It appears it's not properly cosidering the return on retraction in the filament tracking, so each retraction offsets the filament usage improperly. Bump. @dc42

Nice, that did it. Thanks!

Hey folks;

In my previous firmware version I had no issue with the printer waiting for heat up, now it seems that the code setup provided by simplify3d selects tool 0 (at 0 degrees) as the active tool head and then ignores the wait from M109 for tool 1 (set to 235). Example output code below:

G90
M82
M106 S0
M140 S100
M190 S100
M104 S0 T0
M104 S235 T1
M109 S235 T1
M141 S0; Turn on chamber heat
G28 ; home all axes
G0 X3 Y3;
G1 E3;
; process ABS Dbot Right
; layer 1, Z = 0.200
T1
G92 E0.0000
G1 E-4.6000 F3600
; feature skirt
; tool H0.200 W0.480
G1 Z0.200 F1002

Any suggestions?

Hi All;

I'm trying to power my lights through heater channel 4. Any thoughts on how to recode the channel so it will accept binary on/off?

That was it, thanks for your time!

Looks like it, here's the error code.
dwc.js:2 Uncaught Error: Syntax error, unrecognized expression: #table_gcode_files > tbody > tr[data-file='Ben's Test sizing1.gcode']
at Function.ga.error (dwc.js:2)
at ga.tokenize (dwc.js:2)
at ga.select (dwc.js:2)
at Function.ga [as find] (dwc.js:2)
at r.fn.init.find (dwc.js:2)
at r.fn.init (dwc.js:2)
at r (dwc.js:2)
at dwc.js:2468
at getFileInfo (dwc.js:2116)
at updateGCodeFiles (dwc.js:2462)

Just a quick update, it seems like the web interface for the g-code files might be the issue. Sending 'm32 filename.gcode' prints any of the files, including the ones that only show up as 'loading'. Thoughts? I've tried updating the web interface, server, and firmware to no avail.

Trying different web browsers hasn't had an effect either (Chrome, Explorer, Firefox).