I wanted to reach out and see if I could get some help on this. When I try to start a print it takes a while for the hotend to get to 250c and sometimes will fault out because it is moving to slow. However, if it does reach 250c the second that the nozzle moves towards the bed the temperature jumps to somewhere around 30 - 50 degrees hotter resulting in an immediate fault. I have attached a picture off my duet control right after the fault so you can get an idea of what the temp graph looks like. The hotend is a E3D V6 24v with the default thermistor and the board is a duet wifi. Any help would be so appreciated! Thanks!
The spike in the graph is the start of the print. I had brought the temp up to 250c to do some testing.