Thanks for that

I found the problem in simplify3d in the extruder temperature settings. It was as you said. Thanks a lot for your help with that.

One more step closer.

Incidently how do you manage to display files in the manner you do, I looked when making my post but couldn't find how?

Thanks again

Thanks for that I am giving it a try will let you know.

Hi and Happy New Year.

I am hoping that someone can maybe help me with these problems I am having.

I am setting up my printer and when I try to print, the bed and hotend heat up then probe the bed but will only probe the right hand half of the bed having finished this it moves on to printing but as soon as it does it switches the hotend into stanby and fails because the temperature goes low.0_1546285135426_config.g

Here is the beginning of the gcode I was trying to print0_1546285780396_gcodecube.txt .

It has been a slow path rebuilding my A8 but hopefully if I can get past these problems. I will be on the home straight.

Thanks in advance for your help