Hello,

I installed rrf3.5rc2 and have 2 questions

L-factor from 0.01 to 1. what is high and what is low value. Is 0.01 lowest reduction or 1? Is 0.25 reducing the value on 25% that i have 75 % left or does it reduce to 25%. Thats is absolutely not clear for non native english people.

Damping factor same question. If the shaper is too much. Is 0.01 the smallest amount of shaping or 1?

Thank you so much

@Threepwood

Thats part of testing new releases. After thinking about it for 2 days there must be a user missinterpretatation of the shaper readings. We have to concentrate on 40-80 Hz and dont have to cancel over 80hz. Maybe the total wrong shaper and way too much damping on the end.

I will take more tests with a printer i dont need for daily work. And ordered a raspberry to look at klipper.

Now iam at

Mzv 60hz 0.1 l500
M566 x500 y500 e600
M201 x8000 y8000 e3000
Max speed 20000

@Threepwood

News.

Tried 3 different shaper on 60hz 0.1 and l20-1000. stuttering getting worse over 600 and on 1000 i get emergency shutdown from the board.

So still no working shaper for me

Edit

Switched back to rrf 3.4.6 and running zvddd 60hz 0.1 l250 without any blobs and nearly perfekt print

@Threepwood

Will try it this evening. Never ever had i tried it without your informations️ Will increase double amount like 20-40-80….. hope it works

@Threepwood

Having the same issue since i moved to rc1.
What exactly have you changed?

Tia
Chriss