I have just installed a Duet WiFi in my FolgerTech FT-5 and now it just say's "Connecting" all the time and will do nothing else. I had configured the board on the bench prior to installation and everything was functioning properly. In addition, I have also attempted to reconnect to the board via the USB interface and it is not being recognized. This is very frustrating as I bought this board in July and just finished installing it for the first time and now it is not working.
I have checked on the Duet WiFi/Eth + Duex2/5 facebook group and found one other person who had a similiar problem and indicated that he was told the the board was bad. Can anyuone provide any insight it this problem and what I need to do to get this resolved?