Good evening Duet fans,
I am trying to figure out a wiring issue for a 12v pwm noctua redux fan.
When rebooting or idling the fan is on, but when it should turn on with thermostatic control it turns off, im racking my head trying to figure out if the wiring on the fan is wrong.
tldr: which pin on the duet board (OUT3/OUT4) should the pwm signal come from?
from config.g
M950 F0 C"out3" Q500 ; create fan 0 on pin out3 and set its frequency
M106 P0 S1 H1 T45 ; set fan 0 value. Thermostatic control is turned on
