Firmware version 1.19.2
retractprobe.g
M564 S0 ; don't apply limits
G1 Z40 F10000 ; raise head
G1 X-59 Y66 Z35 ; move over the post
G1 Z7 F500 ; push probe down on post
G1 Z35 F10000 ; raise head again
G1 X0 Y0 ; move to somewhere sensible
M564 S1 ; apply limits again
This is where the problem is. I need to update this script to what I had in my previous script prior to updating to 1.19 from 1.18