Hi, i found a doubled "Delete" menu item in DWC/Filaments when right-click on a macro.

Photo attached:

Scrambler

Hi everyone, i got my duet3 mini5+ wi-fi a month ago and, since then, i was struggling to get a stable wifi connection with my home mesh network.

After reading tons of posts by other users with the same problem (very high ping, slow upload rate, frequent disconnections and, maybe, reconnections)...

No fix worked for me then i started examining the problem... I still got 16/20Kb upload transfer rates, 2.5 to 25 sec ping time and frequent disconnections.

My router is an AiMesh ZenWiFi XT-8 with 2 access points. Someone stated that Duet wifi messes up with Airtime fairness, others with universal beanforming.

So i decided to put another access point (d-link) near the printer and voilà, 700kb/s and no disconnections at all.

I tried disabling everything on the Asus side, but nothing worked.

I'm so sorry that Asus routers and Duet3 wifi modules have that strange incompatibility issue...

Hi, i found a doubled "Delete" menu item in DWC/Filaments when right-click on a macro.

Photo attached:

Scrambler

Hi everyone, i got my duet3 mini5+ wi-fi a month ago and, since then, i was struggling to get a stable wifi connection with my home mesh network.

After reading tons of posts by other users with the same problem (very high ping, slow upload rate, frequent disconnections and, maybe, reconnections)...

No fix worked for me then i started examining the problem... I still got 16/20Kb upload transfer rates, 2.5 to 25 sec ping time and frequent disconnections.

My router is an AiMesh ZenWiFi XT-8 with 2 access points. Someone stated that Duet wifi messes up with Airtime fairness, others with universal beanforming.

So i decided to put another access point (d-link) near the printer and voilà, 700kb/s and no disconnections at all.

I tried disabling everything on the Asus side, but nothing worked.

I'm so sorry that Asus routers and Duet3 wifi modules have that strange incompatibility issue...