thanks for the quick answer 
Posts made by Sebinski
-
RE: e3d Big Box with IDEX Modification Manual Bed Levelingposted in IR Height Sensor
-
e3d Big Box with IDEX Modification Manual Bed Levelingposted in IR Height Sensor
Hi Guys,
on my Big Box with IDEX-Modification i installed my IR-Probe at the side of the Printing bed to Home my Z-Axis. So in my M558 Command P1 for a IR-Probe is active. But because the Probe is active but stationary and can't move in XY i can't use G29 for an automatic Meshleveling. Is there still a possibility to create a heightmap.csv manually?
Cheers
Sebastian