Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Sharpie
    • Profile
    • Following 0
    • Followers 0
    • Topics 8
    • Posts 56
    • Best 0
    • Controversial 0
    • Groups 0

    Sharpie

    @Sharpie

    0
    Reputation
    1
    Profile views
    56
    Posts
    0
    Followers
    0
    Following
    Joined Last Online
    Location Menifee, CA

    Sharpie Unfollow Follow

    Latest posts made by Sharpie

    • RE: Endstop Not stopping Movement

      OK I can get the system to home to the endstops but my print head stays in the back Left and does not move to the front left after homing. but on a plus note I have gotten it to move to the endstops and stop.

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      I have swapped my motors back to the original settings the problem I am getting now is when I home I still either dont stop when the end stop is hit or the head goes the wrong way. then when I flip the S1 to and S0 to reverse it then try to move the head the opposite axis moved instead. Does anyone have a working config I can start from so I can figure this out?

      Thanks already for all your guys help 😃

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      ok, with those changes I now Home correctly, Thanks =D

      New problem after it is homed the print head does not move to the forward position ie..the front Left corner. It stays in the back left so when I send a print file for it it tries to move backwards which it cant as its already all the way back.

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      Ok so I ended up having to swap my X-axis and Y-axis motors (i did not think going from 1.18 to 1.20 would require a hardware rewire) but per the last post everything moves as it should.

      The problem is still my homing files when i home x or why only that motor turns until its hits the end of the track and starts skipping teeth on the belt.

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      I made the changes in my Homex.g and still only 1 stepper motor moved making the print head pull to one side the front left. So i double checked my Config.g to make sure my "X -10" moved towards my endstop. I then confirmed with the Y-Axis as well. As I switched the "S1" to "S0" instead of the X-Axis moving the Y-Axis would move.

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      ok So I went and and made the changes and it did not do what I thought it would so I re-Tested my Direction settings

      <code>; Machine configuration
      M569 P0 S1 ; Drive 0 goes forwards (change to S0 to reverse it) X-Axis
      M569 P1 S1 ; Drive 1 goes forwards Y-Axis
      M569 P2 S0 ; Drive 2 goes forwards Z-Axis
      M569 P3 R-1 ; Drive 3 goes forwards
      M569 P4 S1 ; Drive 4 goes forwards<\code>

      now when I test and change my P0 from "S1" my X-axis moves to "S0" my Y-Axis moves

      I feel like I am loosing it. Is there a working config I can just buy from someone?

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      When I send a move command the machine moves correctly the issue is that when I issue a Home command on either X or Y that only one Stepper moves and does not stop when the end stop is triggered.

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      Here are my current config files

      3_1536536828297_homey.g 2_1536536828296_homex.g 1_1536536828296_homeall.g 0_1536536828296_config.g

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      So I dont have a backup of my config =(, but I am still when I send move commands it works as intended but when I Home only one of my 2 steppers move. I ran through the RepRap config file generator again and it gave me the same settings so I am not sure what to change.

      Is there a setting that makes it not move both steppers as needed for CoreXY or does my machine think its in Cartesian mode when it Homes?

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie
    • RE: Endstop Not stopping Movement

      Would you suggest me going back down to 1.18?

      posted in Tuning and tweaking
      Sharpieundefined
      Sharpie