@shenbiand4 I found a thread about your motor on lightburn-forum.
The only confusing info about a replacement motor was the required shaft diameter.
Make sure, you measure your motors shaft, before you buy. NEMA23 steppers can be found with 5 ,6, 8, 10mm shaft and also 1/4 or 3/8 inch shaft.
If you pick the wrong one, you'll have to look for the right pulley for your belt.
All other requirements are pretty common, like 1.8 degree, 4-wire, 2.8A and 56mm motor length as you've already noted. Can't go wrong there.
The Oyo motors you've linked are almost identical, except for the D-shaft and wire length. I'd go for D-shaft, if I had to choose.