@Veti Yessir im sure about the currents as the ones in the link you put are the same besides the Extruder.

@bearer Also was messing with D and V parameters. Helped slightly but they're still really loud.

@Veti Been testing all day and still sound like poop. Thanks though!

@bearer

https://www.reprap.me/creality-3d-two-phase-42-34-reprap-42mm-stepper-motor-for-ender-3-3d-printer.html

https://www.youtube.com/watch?v=JWDe56KYB_w Video of my printer. Thanks for the reply.

Duet 2 Ethernet
Please let me know if theres any other info needed.

; Drives
M569 P0 S0 ; physical drive 0 goes backwards
M569 P1 S0 ; physical drive 1 goes backwards
M569 P2 S1 ; physical drive 2 goes forwards
M569 P3 S0 ; physical drive 3 goes backwards
M584 X0 Y1 Z2 E3 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z400.00 E93.00 ; set steps per mm
M566 X1200.00 Y1200.00 Z24.00 E300.00 ; set maximum instantaneous speed changes (mm/min)
M203 X9000.00 Y9000.00 Z180.00 E6000.00 ; set maximum speeds (mm/min)
M201 X500.00 Y500.00 Z100.00 E5000.00 ; set accelerations (mm/s^2)
M906 X800 Y800 Z800 E1000 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout