@phaedrux
OK, ran the commands - this attached file shows the result...
YAT Log.txt
I did try to put the contents of the file in the body but it got flagged as spam?
m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03 running on Duet WiFi 1.02 or later
Board ID: 0JD0M-9P6B2-NJ4S8-6J1FJ-3SN6T-TS4GJ
Used output buffers: 1 of 24 (10 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 93304 of which 0 recycled
Exception stack ram used: 312
Never used ram: 11776
Tasks: NETWORK(ready,548) HEAT(blocked,1236) MAIN(running,3652) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:23:20 ago, cause: power up
Last software reset details not available
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 20.6, current 20.8, max 21.2
Supply voltage: min 24.1, current 24.2, max 24.2, under voltage events: 1, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 3178467788
Slowest loop: 0.18ms; fastest: 0.08ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "m122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 0.17ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is running
WiFi module is idle
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address e0:98:06:a4:6a:9f
WiFi Vcc 3.39, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 28080
Socket states: 0 0 0 0 0 0 0 0
ok
m552 s0
ok
m552 s0m997 s1
ok
m997 s1
Trying to connect at 230400 baud: success
Erasing 4096 bytes...
Erasing 212992 bytes...
Uploading file...
5% complete
10% complete
15% complete
20% complete
25% complete
30% complete
35% complete
40% complete
45% complete
50% complete
55% complete
60% complete
65% complete
70% complete
75% complete
80% complete
85% complete
90% complete
95% complete
Upload successful
ok
m552 s0
ok
WiFi module started
M587 S"xxxxxxxxxx" P"xxxxxxxxxx"
ok
M552 s1
ok
WiFi reported error: no known networks found
WiFi module is idle
m587
M587: Failed to retrieve network list
ok
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
m115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2
ok
WiFi reported error: no known networks found
WiFi module is idle
m98 p"addnetwork.g"
M587: Failed to add SSID to remembered list
Error retrieving WiFi status message: bad reply format version
WiFi module is idle
ok
WiFi reported error: no known networks found
WiFi module is idle
Does this information provide any hints as to what I'm not doing/doing wrong?
I have also tried connecting to another network using a completely different router/SSID/password
Thanks,
Tony