Posts made by the_lund

@t3p3tony i will i bought it direct from http://duet3d.com

Thanks for your help

i get to a site like when your net broke down

@t3p3tony

Did not work sorry ping the wrong ip

Another pc has taken the same ip

i have tryed with the cabels

Did not work sorry ping the wrong ip
i have tryed with the cabels

i did the set up 8 times now still no light

Maby it is just a bad board

i have not switch the sd cards around butt still only the old is working

Okey i have copy the sd card form the old one with that result that the ip is 0.0.0.0.

network is enable. but still no light

Hi.

i cant fint my duet on the network. i have to printes total equal using same firmware and config file..

but i can´t find the newest.

The ethernet port light do not turn on when pluged in.

i have tried and switch network kable

; General preferences
G90 ; Send absolute coordinates...
M83 ; ...but relative extruder moves

M667 S1 ; Select CoreXY mode

; Network
M550 PHiCorexy2 ; Set machine name
M552 P0.0.0.0 S1 ; Enable network and acquire dynamic address via DHCP
M586 P0 S1 ; Enable HTTP
M586 P1 S0 ; Disable FTP
M586 P2 S0 ; Disable Telnet

In yat i says

Network is enabled, configured IP address: 0.0.0.0, actual IP address: 192.168.0.22<LF>ok<LF>

am i missing some thing here ?