I am trying to figure out what power supply I would require, I have seen the data sheet for the duet 3 6hc, but what I am having some trouble with is what would be ideal.

I bought 3 steppers from steppers online
They are nema 34 model 34he59-6004s.
They are rated at 6amp each but I am not seeing the voltage, what I can find for other nema 34 steppers are in range from 60vdc to 100vdc.
Should I use a 48v 1000w power supply.

Machining I am ok with but this is all new to me.

So what size power supply would anyone here recommend.

Thanks

Nope no heaters or anything like that, I'm only interested in making chips.

thanks you guys have been extremely helpful

I am trying to figure out what power supply I would require, I have seen the data sheet for the duet 3 6hc, but what I am having some trouble with is what would be ideal.

I bought 3 steppers from steppers online
They are nema 34 model 34he59-6004s.
They are rated at 6amp each but I am not seeing the voltage, what I can find for other nema 34 steppers are in range from 60vdc to 100vdc.
Should I use a 48v 1000w power supply.

Machining I am ok with but this is all new to me.

So what size power supply would anyone here recommend.

Thanks

I seen that this has been brought up once before in a older post, but am wondering if the newer reprap can do canned cycles
I am in the process of purchasing all the things I need to build a new mill fixed gantry, I not sure what motion controller I want to go with, I would like the options for tapping and boring.

Also is reprap capable of i-0. J-0. Commands

I see the administrator responded
But I don't see a way to respond to thank you
A i-0.0 and j-.0
Would look something like
G03 x location i-0.234 j-0.0038
It's just a way to cut circle without having to do every arc move as a single step