Posts made by Tool88

Nope no heaters or anything like that, I'm only interested in making chips.

thanks you guys have been extremely helpful

I am trying to figure out what power supply I would require, I have seen the data sheet for the duet 3 6hc, but what I am having some trouble with is what would be ideal.

I bought 3 steppers from steppers online
They are nema 34 model 34he59-6004s.
They are rated at 6amp each but I am not seeing the voltage, what I can find for other nema 34 steppers are in range from 60vdc to 100vdc.
Should I use a 48v 1000w power supply.

Machining I am ok with but this is all new to me.

So what size power supply would anyone here recommend.

Thanks

I seen that this has been brought up once before in a older post, but am wondering if the newer reprap can do canned cycles
I am in the process of purchasing all the things I need to build a new mill fixed gantry, I not sure what motion controller I want to go with, I would like the options for tapping and boring.

Also is reprap capable of i-0. J-0. Commands

I see the administrator responded
But I don't see a way to respond to thank you
A i-0.0 and j-.0
Would look something like
G03 x location i-0.234 j-0.0038
It's just a way to cut circle without having to do every arc move as a single step