@gloomyandy Thank you for the info. I installed the version (RC.3+), also that should fix my layer shift, that I got in a print yesterday. I applied now MZV instead of ZVD.
Can someone recommend to lower the damping factor (I have im mind, that I read that anywhere)
I do some tests and come back after.
Thanks!
Latest posts made by TrippZ
-
RE: Input Shaping working on Test Prints, but not on "real" Objectsposted in Tuning and tweaking
-
RE: Input Shaping working on Test Prints, but not on "real" Objectsposted in Tuning and tweaking
@oliof Does Klipper a better Job for small segments than RRF does?
-
Input Shaping working on Test Prints, but not on "real" Objectsposted in Tuning and tweaking
Hello together,
at the moment I am struggeling with the tuning of my acceleration/ input shaper.
Currently I have installed the 3.5.0-rc.3 firmware on my Duet 2 Maestro. Printer is a self designed core xy printer (Hypercube/VzBot) Frankenstein.
Yesterday I recalibrated my Input Shaping using the Plugin an doing the Test Print on my printer.
And what can I say... it looked amazing considering the acceleration rising from 8000mm/s^2 to 12000mm/s^2
I was very happy with the result. I dialed in the acceleration to 10k.
Today I startet to reprint some of my printer parts and was shocked by the result.
What can I do here and why the test print looked so good an the "real" part so bad. For sure I can lower the acceleration, but the ringing tower looked promising
