Topics created by UcantCNCme

@UcantCNCme said in setting up home location in none standard orientation:

is it easier to change the config of the duet or the parameters of the post processor and fusion to be aligned with my router?

That is entirely up to you. If both approaches will solve the problem pick which one makes the most sense to your way of thinking.

Frederick

Did you mean to upload a gcode file?

I'm not a CNC user so I'm not familiar with the workplace coordinate stuff, but something like this maybe?

https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_G53_Use_machine_coordinates

For what it's worth it's probably overkill cooling and if you're trying to reduce dust build up forced air will be counter productive.

A single low speed filtered fan running all the time should be enough to positively pressure the case and keep dust out.

Or use the gcode control method to only turn on during a job operation.

ah right, good to know, thank you very much for your help. i need to start another thread regarding my XYZ touch probe now, hopefully i can get this thing up and running!