Topics created by Yar

@Yar m503 reads config.g not what currently stored in flash. Run G31 to find the current value. You will have to edit config.g to save the value

@Yar said in Connecting to web control:

So if I make the change in YAT that would put it in memory?

It will remain until the next reboot

@Yar said in Connecting to web control:

the x and y home to the front left corner. The z probe is homing slightly right of that. Shouldn't it be in the center?

Homing is controlled by the homeall, homex, homey, homez macros. It will do whatever the commands in those files tell it to do.

https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter#Section_Homing_files