Elimination of ripples
-
I have built a custom machine that had ripples on the surface using an MKS gen 1.4 board, Once I changed the board to Duet It was eliminated.
Wondering what the reason could be ?
above picture is before changing.
-
They don't look eliminated to me...just looks like they are finer which could just be from the microstepping.
-
@jamesm agree. Wonder what that's about. Op, have you carefully calibrated your esteps?
-
I feel it has definitely improved by a large extent, will try calibrating e steps again.
It was mentioned somewhere that e-steps need to be whole numbers and not fractions, is that true ?
-
@hussainsail2002 I've used decimal without issue.
...but equally interested to see if there is anything more than circumstantial evidence showing otherwise.
-
I use decimals as well
