Backlight control

totalos

Hi.
How do I set the panel to turn off the backlight automatically, for example after printing ?
Is it possible to send some g-code to the backlight settings to the panel? (panel 5" integrated).

Phaedrux

On the Setup page on the PanelDue there is an option for backlight dimming.

What version of PanelDue firmware are you running?

totalos

Thank you for your response.
I have 1.23.2 firmware.
I see DIM option but need set dim to a lower brightness level or preferably completely turn off lighting.
Is it possible to control it?

Phaedrux

I don't think it can currently be turned off completely.

hestiahuang

@totalos

Buzzer::SetBacklight(0);

totalos

Thank you. But I can not compile it.