Backlight control

[totalos]

Hi.
How do I set the panel to turn off the backlight automatically, for example after printing ?
Is it possible to send some g-code to the backlight settings to the panel? (panel 5" integrated).

[Phaedrux]

On the Setup page on the PanelDue there is an option for backlight dimming.

What version of PanelDue firmware are you running?

[totalos]

Thank you for your response.
I have 1.23.2 firmware.
I see DIM option but need set dim to a lower brightness level or preferably completely turn off lighting.
Is it possible to control it?

[Phaedrux]

I don't think it can currently be turned off completely.

[hestiahuang]

@totalos

Buzzer::SetBacklight(0);

[totalos]

Thank you. But I can not compile it.