Heavily modified Anycubic Delta printer
-
Heavily modified Anycubic Delta Plus Linear. Has Igus polymer rails, E3d Volcano hot end (currently with 0.6mm nozzle), fresh steppers, duet wifi, astrosyn dampers, 24 volt, a few others things I probably missed. Getting retraction set up and cleaning up the setup, it's VERY quiet and almost there with regards to print quality (way better than with the old stuff on it already)
Big thank you to Tim @ Filastruder for providing great service! I love this thing!
Forgive the mess, figured a rigid.ink starter pack would be nice to hone the settings. I'll cable wrap when I get the part cooling setup situated.
-
broken pic links
-
I got them linking but they're a bit skewed =(
-
where did you get that hotend mount for the anycubic effector?
-Jannis
-
Pics are broken again? Use postimage.org
-
where did you get that hotend mount for the anycubic effector?
-Jannis
I got it custom milled for me, sketched it up in CAD. I used the holes in the effector plate with stainless standoffs and had it machined to fit the hot end nicely.
