Hi!

Has anyone made/found a part cooling fan setup for the E3D Hemera, when used with the duet 3 toolboard?
Looks like a very nice solution for my wiring project on my Tevo Beastnado

-j

@kraegar said in RailCore II corexy:

The halo files will be released once they've been tested on a 300zl, and confirmed to work. Then I'll clean up a lot of cruft from the design, and publish it. Probably within a week or so of testing, depending on my work schedule.

Any news about this?
Would be interesting to cnc this on a shopbot I got access to

-j

Hi!

trying to assemble the top and bottom triangle with the parts from @dc42 kossel bom.

does anyone have any neat tricks to how I can get the extrusions onto all 3 corners?
the I-type t-nuts are just doing all they can to mess this build up...

-Jannis

@fma I want to do a custom buildplate like the geckotec system.
(they dont have the base plate for my Tevo Tornado)

-J

@djdemond Thanks! I sent an email just now
Will be interesting to see the shipping charges.
(might be a good idea to check before any ordering is done)

-Jannis

I've been trying to find suppliers of custom cut tooling plate, and I have found several in the UK with really decent prices.
eg clickmetal only wants £22 for it.

The problem is that none of them ships outside the UK.

Does anyone know of a supplier for tooling plate that might ship to Norway (or worst case Sweden)?

I hope to create a 370x310x6mm buildplate where I can cnc out pockets for magnets on the top surface for a gecktotec magnetic buildplate

-Jannis

Just saw this on aliexpress:

http://s.aliexpress.com/aQRRvINb

Seems the chinese has started cloning the duetwifi.
Interesting to see they actually credit think3dprint3d and esher3d.
They even print on the board that it’s not supported or endorsed by the creators.

-Jannis

interested in this:
1 x DuetWifi v1.0 no 413/500, including 8GB micro sdcard, T3P3 mount, wiring loom/connectors - £37.50 the lot

Would you ship to Norway?

-Jannis

@Jimborr:

These should work too, but the can be a pain sometimes since there is no spring on them

https://www.ebay.co.uk/itm/60pcs-2020-aluminum-Extrusion-T-Slot-nuts-Aluminum-profiles-Nut-M3-M4-M5-Nuts/252397788683?hash=item3ac4149e0bmmgQhJtXQHn8lXc1JzergPw

These are the ones I got that's for B-type and not I-type.
B-type = 6mm, I-type = 5mm.
Eg. they wont turn in the slot unfortunately

-J

Thanks!

-J