Struggled for a month with Ender3 Upgrade.

abstraktlighting

@bartolomeus wifi
im trying to get it to atleast have wifi and open duetwebcontrol now

bartolomeus

@abstraktlighting Please post your config.g (if you can access it)

Also, don't use that Cura profile. Looks like you're using the standard cura profile for the ender 3. That start code is made for Ender owners that can't access their boards firmware.

abstraktlighting

@bartolomeus thanks imnot even trying to print any thing now . Im trying to just make it function. I cannot control it.

bartolomeus

@abstraktlighting no one can help without your config file.

abstraktlighting

@abstraktlighting I loaded the sd card with wifi bin and some hlper code and something else , got wifi on and it gave me the ip.typed the ip in browser and i got a blank page with a blue teardrop so almost connected to web contgrol but not quite

abstraktlighting

@bartolomeus I cannot get my config file without web control because I dont know which one its using?
right?

droftarts

@abstraktlighting Have you tried connecting via USB? Start at the beginning, with this page: https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

You'll be able to get the firmware version (which would be good for us to know), and be able to configure and check you're connected to WiFi.

If you haven't put the Duet Web Control files on the SD card, you won't be able to connect to the DWC.

The firmware version also has to match the Wifi firmware version, and the Duet Web Control version. So know what each of these are is important.

Ian

abstraktlighting

@droftarts i am connected to the board via usb yes

A Former User

@droftarts said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:

@abstraktlighting Have you tried connecting via USB? Start at the beginning, with this page: https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:

@droftarts i am connected to the board via usb yes

And did you get to step 5 in the guide posted? If so please share the output of that command?

@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:

@bartolomeus I cannot get my config file without web control because I dont know which one its using?
right?

It always uses the same file /sys/config.g - how did you get it onto the SD card, should be able to get it off the same way no?

abstraktlighting

@bearer OK so I did all that up to the point where it says my firmware is 1.20 and duet wifi is 1.o
this is where I got messed up before.

abstraktlighting

@abstraktlighting I deleted everything from sd card ttrying to get the webciontrol and wifi back on

A Former User

@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:

@abstraktlighting I deleted everything from sd card ttrying to get the webciontrol and wifi back on

then you probably have to put it back..

abstraktlighting

@abstraktlighting It was acting weird after i tried to upgrade firmware, x- and x+ and y- and y+ were reversed
soI have a bunch of config files i tried to fix it with

abstraktlighting

I saved them I can put one back but iT wouldnt give me web control
should i put one back on card and M997 it?

abstraktlighting

whats step 5?

abstraktlighting

@droftarts THose file directories you got with 21 and 23 and 24 assets are so confusing I dont know which to match up with which . I thought i upgraded the latest one and thatys what got mre in this mess. so whAT SHOULD I DO NOW?

abstraktlighting

@abstraktlighting AND THE STEPS ARENT NUMBERED IN THE GUIDE IF 5 WAS m<115 THEN YES I SAID FIRMWARE 1.20 WIFI 1.0

sorry caps this keyboard is messed up from resin

abstraktlighting

@bearer and putting it backl goes back to original issue ....it doesnt work

abstraktlighting

Thank you still back where I started

droftarts

@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:

@bearer OK so I did all that up to the point where it says my firmware is 1.20 and duet wifi is 1.o
this is where I got messed up before.

Okay. Download this release: https://github.com/dc42/RepRapFirmware/releases/tag/v1.20

This is the firmware version you are on. Let's get that working before you update. The DWC files are in the DuetWebControl.zip folder. Uncompress that, and copy it to the www folder on the SD card. To do this, you'll probably have to remove the SD card from the Duet, and plug it into your PC.

Ian