Struggled for a month with Ender3 Upgrade.
-
@abstraktlighting said in I can't get Duetwifi to print. It's been a month. Help please.:
@PaulHew Thank you yes it was DPT video. It messed me up at everyb turn. I will check pheadruxa bible I appreciate your help.
Yeah DPT pretends to know things that he clearly doesn't. He might not be "clock is right twice a day" but he's wrong a lot.
-
@abstraktlighting I've tried everythimng they said here and I've tried for hours and hours .Now i cant connect to duetwebcontrol and I am ready to rip this board outta here and just go by another machine. Thanks for everyone that tried to help.It seems like duet would have some customer service. Half the time when I'm searching for answers the site is telling me Im mismatched with session and blocks me. This is so Frustrating. Why isnt therre just a simple download site that wipes the board and loads it with the right shit to make it work?
-
@PaulHew nothing worked i am at my wits end ready to smash this.the site you sent me too was almost good. just not quite. when it veered off to the maestro it just lead me in circles. i cant believe the hours ive put into this. Any ideas? I cant get it to connect to duetwebcontrol to try and fix it even. thanks for your help before anyway.:) jeff
-
Which board do you have (Maestro, Wifi or Ethernet)?
-
@bartolomeus wifi
im trying to get it to atleast have wifi and open duetwebcontrol now -
@abstraktlighting Please post your config.g (if you can access it)
Also, don't use that Cura profile. Looks like you're using the standard cura profile for the ender 3. That start code is made for Ender owners that can't access their boards firmware.
-
@bartolomeus thanks imnot even trying to print any thing now . Im trying to just make it function. I cannot control it.
-
@abstraktlighting no one can help without your config file.
-
@abstraktlighting I loaded the sd card with wifi bin and some hlper code and something else , got wifi on and it gave me the ip.typed the ip in browser and i got a blank page with a blue teardrop so almost connected to web contgrol but not quite
-
@bartolomeus I cannot get my config file without web control because I dont know which one its using?
right? -
@abstraktlighting Have you tried connecting via USB? Start at the beginning, with this page: https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7
You'll be able to get the firmware version (which would be good for us to know), and be able to configure and check you're connected to WiFi.
If you haven't put the Duet Web Control files on the SD card, you won't be able to connect to the DWC.
The firmware version also has to match the Wifi firmware version, and the Duet Web Control version. So know what each of these are is important.
Ian
Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard
-
@droftarts i am connected to the board via usb yes
-
@droftarts said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:
@abstraktlighting Have you tried connecting via USB? Start at the beginning, with this page: https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7
@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:
@droftarts i am connected to the board via usb yes
And did you get to step 5 in the guide posted? If so please share the output of that command?
@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:
@bartolomeus I cannot get my config file without web control because I dont know which one its using?
right?It always uses the same file /sys/config.g - how did you get it onto the SD card, should be able to get it off the same way no?
-
@bearer OK so I did all that up to the point where it says my firmware is 1.20 and duet wifi is 1.o
this is where I got messed up before. -
@abstraktlighting I deleted everything from sd card ttrying to get the webciontrol and wifi back on
-
@abstraktlighting said in Duetwifi? THIS FRIGGIN BOARD.? CUSTOMER SERVICE?:
@abstraktlighting I deleted everything from sd card ttrying to get the webciontrol and wifi back on
then you probably have to put it back..
-
@abstraktlighting It was acting weird after i tried to upgrade firmware, x- and x+ and y- and y+ were reversed
soI have a bunch of config files i tried to fix it with -
I saved them I can put one back but iT wouldnt give me web control
should i put one back on card and M997 it? -
whats step 5?
-
@droftarts THose file directories you got with 21 and 23 and 24 assets are so confusing I dont know which to match up with which . I thought i upgraded the latest one and thatys what got mre in this mess. so whAT SHOULD I DO NOW?
