Firmware 2.05RC2 released

dc42

This release fixes an incompatibility between 2.05RC1 and Duet Web Control 2, and a bug with using M3 and M5 commands to control a laser cutter or engraver. Get it from https://github.com/dc42/RepRapFirmware/releases/tag/2.05RC2.

jmshep

Seems to work ok now.
Thanks DC.

Adrian52

@dc42 working fine for me too so far. Excellent work - thank you very much.

avaradus

I'm testing this version 2.05RC2
Now uptime 47:00:29 ago
I finished 2 long time prints and Used output buffers: 9 of 24 (24 max)
IMHO after 4 long time prints, buffers come closer to max and printer freeze... again =(

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05RC2 running on Duet WiFi 1.02 or later
Board ID: 08DGM-956GU-DJMSJ-6JTDA-3SS6L-TARHD
Used output buffers: 9 of 24 (24 max)
=== RTOS ===
Static ram: 25688
Dynamic ram: 93200 of which 356 recycled
Exception stack ram used: 544
Never used ram: 11284
Tasks: NETWORK(ready,628) HEAT(blocked,1232) MAIN(running,3816) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 47:00:29 ago, cause: software

Norder

Moin,

I am having problems with the G30 command.
BLTouch ... no extension of the measuring pin ... no lowering of the X-axis.
Displays error of the axis.

I forgot the exact error message because I have the version 2.04 installed again.

avaradus

@avaradus 4 days have now passed, 5 long time (16 hour) prints finished, and printer stil work! I will continue to testing...

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05RC2 running on Duet WiFi 1.02 or later
Board ID: 08DGM-956GU-DJMSJ-6JTDA-3SS6L-TARHD
Used output buffers: 8 of 24 (24 max)
=== RTOS ===
Static ram: 25688
Dynamic ram: 93200 of which 356 recycled
Exception stack ram used: 544
Never used ram: 11284
Tasks: NETWORK(ready,628) HEAT(blocked,1232) MAIN(running,3816) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 103:50:19 ago, cause: software

fotomas

There seems to be an issue with changing (increasing) the hot end temperature during print. Doing so causes a heater fault and a stopped print.

I have not experienced this in previous versions.

Board: Duet 0.85
Firmware: RepRapFirmware for Duet 1.26 (2019-12-13b1)