E3D MS-TC and RRF3

arhi

Hi all,

First post here, long time reader.

I'm about to mount DUET2ETH on my E3D Motion System with tool changer and from what I read on the github they are mostly providing examples for RRF2.

Before I dig into this project during weekend maybe someone already have the config for RRF3 for E3D motion system and tool changer that can save me some time?

dc42

If you look in the Getting Started section of the E3D forum, both I and at least one other user posted some RRF3 config and homing files in threads there.

Danal

I have a working Jubilee, which very similar to the E3D toolchanger. It is running on a Duet3+Pi, and two expanders.

I will post my config (and other files) tonight.

arhi

Thanks, "RRF3-TC-sys-files-centre-zero.zip" might be exactly what I need to start!

dc42

If that's the file that I posted, there are errors in 2 of the files that I have corrected since I uploaded them.

arhi

@dc42 you posted 2 archives, this is the second one with origin in the center of the bed. I will start the assembly of the MS-TC so hopefully today I will test the configuration out.

arhi

@dc42 this one
https://forum.e3d-online.com/threads/from-rrf2-to-rrf3-on-duet2-wifi.3500/#post-35271

dc42

I have just posted a corrected set of files in that same thread.