Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Tevo Little Monster wiring on a Duet3D WiFi

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    192
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • cdalyaiundefined
      cdalyai
      last edited by

      I brought a duet because of all the trouble I had with the original MKS subbase and need some help with a few connections.
      I have a label that reads “Heater 1” and another label that reads “Heater 2” on my TLM, can you or someone else explain where these connect on a Duet3D Wi-Fi Board. Also I have a label “Cooling Fan 1” and a label “Cooling Fan 2” that I need help with also.
      Thanks in advance, Chris

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Have you seen the wiring diagram?

        https://duet3d.dozuki.com/Wiki/Duet_Wiring_Diagrams

        Do you know which of heater 1 and heater 2 is the hotend and which is the bed? Same for the fans? Can you trace back the wiring?

        The bed heater would go to the heated bed terminals obviously. And the hotend to heater E0.

        Same for the cooling fans, do you know which is the hotend and which is the part cooling?

        The part cooling fan would go to fan0, and the hotend to fan1.

        Z-Bot CoreXY Build | Thingiverse Profile

        cdalyaiundefined 1 Reply Last reply Reply Quote 0
        • cdalyaiundefined
          cdalyai @Phaedrux
          last edited by

          @Phaedrux
          Read your response and took a brake went and got sum Pizza and the solution was their. I resolved the problem, Heater 1 wiring was the red and Heater 2 was the black and they connect to the PWM FANS on the duet. Same for the Cooling Fan 1 and Cooling Fan2. You know how the solution is right in your face but you can't see it.
          Thanks....

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA