failed to parse major T-code number (he)

Government_Bacon

@Phaedrux im trying to but having trouble doing that i uploaded the new files but cant get them to install

Phaedrux

In that case you can pop out the SD card, and replace the contents of /www with the contents of the 2.0.7 zip file.

Phaedrux

Also, what firmware version exactly are you using? Send M115 to check.

Government_Bacon

got this when i opened the jobs tab Capture 1.PNG

i am using a SBC

Phaedrux

I think you're going to need to do some updating of your versions.

Can you delete the offending file in the meantime?

Government_Bacon

got the dwc updated will update the firmware now

Government_Bacon

@Phaedrux ok updated the firmware and the web-controller and i am getting the same error

Phaedrux

Can you post that gcode file please?

Government_Bacon

BLtouch Support Volcano v2.gcode

Phaedrux

I notice two things about the file.

1 it looks like you're using T1 instead of T0 as your first tool.

G90
M82
M106 S0
M104 S210 T1
M109 S210 T1
G28
G29 S1
; process Process1
; layer 1, Z = 0.180
T1

2 at the end of the file there is a section with some text that isn't commented out.

; layer end
M104 S0                                                       ;extruder heater off 
G91                                                              ;relative positioning
G1 E-1 F300                                                 ;retract the filament a bit before lifting the nozzle
 to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed}   ;move Z up a bit and retract filament even more
G28 X0 Y450    		               ;move X to min endstops and Y max to bring to front 
 so the head is out of the way
M84                                                              ;steppers off
G90                                                              ;absolute positioning

Possibly your endgcode. It might be choking on that when it's being scanned.

Government_Bacon

@Phaedrux it is the ending gcode i got rid of it and it is fine now