Ender 3 Duet Wifi not working
-
I haven't turn my ender 3 pro on for about a week and it homed the axis fine I moved it to another table and tryed to turn it on and this is what happen to have a Duet 2 Wifi. It's like the printer doesn't know when it hits the end stop and the x axis just shakes and doesn't move everything work fine last time it was on. Here a video https://drive.google.com/file/d/13KvlJ7S5f4xp_WLw61MHGZ7yY1HWIakM/view?usp=drivesdk
-
Check if the endstops work properly before homing?
https://duet3d.dozuki.com/Wiki/Connecting_endstop_switches#Section_Configuration_overview
-
I've checked the wiring I've even tried replacing them when I goto the settings and goto the end-stop in the web control when the end stop is not clicked it says no like it should and when I click them they both switch to YES so they are sending the signal but for some reason, it's not stopping the stepper motors and they just keep trying to go.
-
post your config and homing files for verification please.