How to get started...
-
I have ordered a new Duet3 mainboard that I will be using to upgrade my Tevo Tornado printer. In preparation, I have been looking through the documentation and find very little Duet 3 documents and guides. Can I assume that the Duet 2 guides and documentation is applicable to Duet 3 or is there somewhere else that I should be looking or am I just out of luck?
I also don't see anywhere that describes new processes like connecting one's Raspberry Pi to the Duet board. That process would exist under the Duet 2 documentation, as far as I know.
Any advise will be greatly appreciated...
k.
-
If you highlight which sections are insufficient it will help improve it
-
Hey, that is a great link. I was unable to find that. Maybe it is just a matter of the standard support pages not having the links yet.
I went to the documentation pages and all the links there are pretty much Duet 2. In fact the "Getting Started" links were exactly what I was looking for and the "Getting Started" on the documentation page is the Duet 2 "Getting Started" .
Anyway, thanks for heads up on the link.
k.
-
@sevilnatas First page of documentation, START HERE section, has a link directly to the above page: https://duet3d.dozuki.com/#Section_START_HERE
If you're running the Duet 3 without a Raspberry Pi, much what you need to do IS the same as the Duet 2. We're making our way through the documentation to update it for Duet 3, but there's a lot of very in-depth pages to update.
Ian
TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi
-
@droftarts Thanks Ian, when I had initially posted this, I hadn't actually received my Duet yet and was just overly excited to get started that I started trying to bone up before it got here. I have the board in my hands now and I am off to the races. Thanks for the link and I'll see ya in the forums!
