Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Redefining WiFi

    Scheduled Pinned Locked Moved Solved
    Tuning and tweaking
    3
    6
    259
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mperdueundefined
      mperdue
      last edited by

      I had to reinstall my WiFi in my home today and was not able to use my existing SSID because the newer firmware required more than the 2 characters I was using. Now I need to reset my Duet WiFi network connect but I’ve been unable to find the proper instructions. Can someone point me in the right direction?

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User
        last edited by

        @mperdue said in Redefining WiFi:

        newer firmware required more than the 2 characters I was using

        sure about that?

        In any case, look up M587

        mperdueundefined 1 Reply Last reply Reply Quote 0
        • OwenDundefined
          OwenD
          last edited by

          First see

          https://duet3d.dozuki.com/Wiki/Gcode#Section_M588_Forget_WiFi_host_network

          then

          https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters

          mperdueundefined 1 Reply Last reply Reply Quote 0
          • mperdueundefined
            mperdue @A Former User
            last edited by

            @bearer said in Redefining WiFi:

            @mperdue said in Redefining WiFi:

            newer firmware required more than the 2 characters I was using

            sure about that?

            In any case, look up M587
            Newer firmware in my WiFi router, not the duet.

            1 Reply Last reply Reply Quote 0
            • mperdueundefined
              mperdue @OwenD
              last edited by

              Thanks.

              @OwenD said in Redefining WiFi:

              First see

              https://duet3d.dozuki.com/Wiki/Gcode#Section_M588_Forget_WiFi_host_network

              then

              https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters

              1 Reply Last reply Reply Quote 0
              • mperdueundefined
                mperdue
                last edited by

                I finally had an opportunity to correct this problem. It took a couple of attempts but the first printer is back on the network and working fine. The other one will be reconnected later today. Thanks for pointing me in the right direction.

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA