My little Spring hack for BerdAir on Smart Effector

[janjoh]

So, I finally got annoyed at having to mess with the cable tie in order to remove/replace the BerdAir in order to swap nozzle and such. So, I scavenged the springs from two old ball point pens. It works quite nicely. Here's a video of said "hack".

https://youtu.be/cMkjLRHmXe4

[giostark]

Interesting

[DaveA]

Thanks. I'm going to try that.

[felt342]

Looking nice! May ask what are you using for the pump?

[janjoh]

@felt342 The normal 540-size brushed 24V. If i had more money I'd try a Kamover KVP8. If I had even MORE moneis i would try an airbrush compressor with a servo valve