Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 Ethernet and SBC

    Scheduled Pinned Locked Moved
    Beta Firmware
    29
    302
    32.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • smoki3undefined
      smoki3 @Luke'sLaboratory
      last edited by

      @Luke-sLaboratory said in Duet 2 Ethernet and SBC:

      Much of the conversation is about the D2 with Ethernet, can this be done with the WIFI version by what I assume would be desoldering the module off?

      Yes with desoldered wifi module it should work fine

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User @Luke'sLaboratory
        last edited by A Former User

        @Luke-sLaboratory said in Duet 2 Ethernet and SBC:

        assume would be desoldering the module off?

        it might be possible to just upload a custom wifi firmware that leaves the spi buss and interrupt line as high impedance inputs, and enters deep sleep (but such a firmware would need to be created tested from here)

        edit: it totes works

        edit: if anyone is to try this - update wifi firmware first, the sbc firmware does not accept M997 S1.

        edit: either wifi needs to go or my hired hands messed up the wirng.

        6/26/2020, 11:51:59 AM	Connection to Duet established
        6/26/2020, 11:52:01 AM	Warning: Lost connection to Duet (Board is not available (no data response))
        6/26/2020, 11:52:01 AM	Connection to Duet established
        6/26/2020, 11:52:02 AM	Warning: Lost connection to Duet (Board is not available (no data response))
        6/26/2020, 11:52:02 AM	Connection to Duet established
        6/26/2020, 11:52:06 AM	Warning: Lost connection to Duet (Board is not available (no data response))
        6/26/2020, 11:52:06 AM	Connection to Duet established
        6/26/2020, 11:52:07 AM	M115
        FIRMWARE_NAME: RepRapFirmware for Duet 2 + SBC FIRMWARE_VERSION: 3.02-beta ELECTRONICS: Duet 2 1.02 or later + SBC FIRMWARE_DATE: 2020-06-25b1
        6/26/2020, 11:52:10 AM	Warning: Lost connection to Duet (Board is not available (no header))
        6/26/2020, 11:52:10 AM	Connection to Duet established
        6/26/2020, 11:52:11 AM	Warning: Lost connection to Duet (Board is not available (no header response))
        6/26/2020, 11:52:11 AM	Connection to Duet established
        
        1 Reply Last reply Reply Quote 2
        • Dougal1957undefined
          Dougal1957
          last edited by

          Will the standard DSF system for the SBC remain the same or will we need a different image?

          1 Reply Last reply Reply Quote 0
          • smoki3undefined
            smoki3 @T3P3Tony
            last edited by

            @T3P3Tony so you recommend any resistor which was working fine in you tests?

            A Former User? 1 Reply Last reply Reply Quote 0
            • A Former User?
              A Former User @smoki3
              last edited by

              @smoki3 maybe you'll find some clues if you look at the duet 2 and 3 schematics. i.e. the EDR_CONN already has R17 on the duet 2, and the duet 3 schematic show which values they used there

              smoki3undefined 1 Reply Last reply Reply Quote 0
              • smoki3undefined
                smoki3 @A Former User
                last edited by

                @bearer where do I find the schematic

                A Former User? 1 Reply Last reply Reply Quote 0
                • A Former User?
                  A Former User @smoki3
                  last edited by

                  @smoki3 said in Duet 2 Ethernet and SBC:

                  where do I find the schematic

                  https://github.com/Duet3D/Duet3-Mainboard-6HC
                  and
                  https://github.com/T3P3/Duet/tree/master/Duet2/Duet2v1.04

                  or just google it?

                  smoki3undefined 1 Reply Last reply Reply Quote 1
                  • smoki3undefined
                    smoki3 @A Former User
                    last edited by smoki3

                    @bearer thanks!

                    I googled for it but unter "duet 3 schematics" you don't get it 🙂

                    In the duet3 schematics they use 100Ohm resistors.

                    The duet 2 has for MOSI, MISO and SPCK 47 Ohm and for NPSC0 and EDR 2,2 kOhm

                    @T3P3Tony NPSC0 and EDR have no influence on the speed, right?

                    wilrikerundefined 1 Reply Last reply Reply Quote 0
                    • wilrikerundefined
                      wilriker @smoki3
                      last edited by

                      @smoki3 said in Duet 2 Ethernet and SBC:

                      @T3P3Tony NPSC0 and EDR have no influence on the speed, right?

                      That's correct.

                      I tested with no resistors and with 500R (two 1K in parallel since that's what I just had at hand at the time). The difference is significant but at the same time negligible. Without resistors you can get up to 25-27MHz. With 500R in series you "only" get 13.5-15MHz - but that's still plenty and most likely more than your ever need while at the same time providing you much more protection.

                      @Dougal1957 DSF is absolutely the same. It does neither know nor care if it's a D3 or a D2 on the other end.

                      Manuel
                      Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                      with probably always latest firmware/DWC (incl. betas or self-compiled)
                      My Tool Collection

                      smoki3undefined A Former User? 3 Replies Last reply Reply Quote 0
                      • smoki3undefined
                        smoki3 @wilriker
                        last edited by

                        @wilriker

                        Okay cool. I just ordered some experimental stripboards and the 26 pin connector. So I can test it next week.

                        I will build up a small pcb with the resistors on it.

                        So I will just add some resistors to the MISO, MOSI and SPCK pins. The 2.2kOhm on the two other pins should be enough.

                        How fast is an ESP? Do they also reach the 25 MHz?

                        wilrikerundefined 1 Reply Last reply Reply Quote 0
                        • wilrikerundefined
                          wilriker @smoki3
                          last edited by

                          @smoki3 said in Duet 2 Ethernet and SBC:

                          How fast is an ESP? Do they also reach the 25 MHz?

                          The current configuration sets it to 26.7MHz. The ESP (clocked at 80MHz) can go up to at least 40MHz from what I can see in the source code comments.

                          Manuel
                          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                          with probably always latest firmware/DWC (incl. betas or self-compiled)
                          My Tool Collection

                          smoki3undefined 1 Reply Last reply Reply Quote 0
                          • smoki3undefined
                            smoki3 @wilriker
                            last edited by

                            @wilriker what's the worst case scenario if I connect it directly? Or otherwise what if the speed is to slow (if I choose to big resistors)?

                            wilrikerundefined 1 Reply Last reply Reply Quote 0
                            • wilrikerundefined
                              wilriker @smoki3
                              last edited by

                              @smoki3 So worst case: you fry the SAM4E on the Duet or the ARM of the RPi. That's easy. 😂

                              Let's put the answer about speed this way: currently the default configuration for Duet Software Framework (which controls the SPI speed) is set to 8 MHz for a Duet 3 (which coincidentally has virtually the same max SPI speed as a Duet 2). And so far there have been very to no occasions where this would not have sufficed. So if you run it at 15MHz (with ~500R series resistors) you are still about twice the speed of the normal D3-SBC speed. I guess you run into step-generation limits before you see issues with SPI speed.

                              Manuel
                              Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                              with probably always latest firmware/DWC (incl. betas or self-compiled)
                              My Tool Collection

                              smoki3undefined 1 Reply Last reply Reply Quote 1
                              • smoki3undefined
                                smoki3 @wilriker
                                last edited by

                                @wilriker
                                allright. I will test it soon!

                                1 Reply Last reply Reply Quote 0
                                • smoki3undefined
                                  smoki3
                                  last edited by

                                  @wilriker does the duet 2 provide enough current on the 5 volt circuit to power the pi? Or is it better to use a separate stepdown module

                                  dc42undefined 1 Reply Last reply Reply Quote 0
                                  • dc42undefined
                                    dc42 administrators @smoki3
                                    last edited by

                                    @smoki3 said in Duet 2 Ethernet and SBC:

                                    @wilriker does the duet 2 provide enough current on the 5 volt circuit to power the pi? Or is it better to use a separate stepdown module

                                    The 5V regulator on Duet 2 does not provide enough current to power a Pi safely.

                                    Duet WiFi hardware designer and firmware engineer
                                    Please do not ask me for Duet support via PM or email, use the forum
                                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                                    1 Reply Last reply Reply Quote 1
                                    • A Former User?
                                      A Former User @wilriker
                                      last edited by A Former User

                                      @wilriker said in Duet 2 Ethernet and SBC:

                                      I tested with no resistors and with 500R

                                      thanks for your effort with this btw! which branch would be the best bet to build Duet2_SBC_RTOS/Duet2CombinedFirmware.bin? nvm checking that all the repos have been switched from dc42 to duet3d github turned out to be an idea

                                      smoki3undefined 1 Reply Last reply Reply Quote 0
                                      • smoki3undefined
                                        smoki3 @A Former User
                                        last edited by smoki3

                                        @bearer I build 3.02 branch with the SBC Configuration. This should work.

                                        The build have a different file name. So you have to rename it to flash it over DWC

                                        wilrikerundefined 1 Reply Last reply Reply Quote 0
                                        • wilrikerundefined
                                          wilriker @smoki3
                                          last edited by

                                          @smoki3 Yes, for initial flashing you have to rename it or flash it via bossa (as I did). If you also build DuetIAP and put this into the /sys folder of DSF you can from then on do regular flashing by just uploading the firmware file as is in DWC.

                                          Manuel
                                          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                          with probably always latest firmware/DWC (incl. betas or self-compiled)
                                          My Tool Collection

                                          smoki3undefined 1 Reply Last reply Reply Quote 0
                                          • smoki3undefined
                                            smoki3 @wilriker
                                            last edited by

                                            @wilriker is it a different DuetIAP as the normal build which is released on GitHub?

                                            wilrikerundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA