Duet3 + supervolcano + 24v/12v+MOSFET??
-
Hey,
I want to connect the E3d supervolcano. I have here a 12 v or 24 v version.
Are there any explanations to wire up the MOSFET correctly?
Thanks to all -
If your system is 24V then you don't need to use the mosfet, but be sure to use ferrules where the heater wires connect to the terminal block.
-
@barbarossa-cologne As far as I know, the 24V does not come with a mosfet, mine did not at least. I have used my 24V successfully with a Duet Wifi and wired it just like any old regular heater.
Hope this helps
-Nxt -
I have a version with 12v and mosfet and another 24v without mosfet.
So I can decide which I use
ok. thanks for the fast answer. -
@barbarossa-cologne said in Duet3 + supervolcano + 24v/12v+MOSFET??:
I have a version with 12v and mosfet and another 24v without mosfet.
So I can decide which I useOnly if you can still also choose whether to power your Duet from 12V or 24V.
-
@dc42
I have a power supply with 24v. So I´ll take the 24v version on out1.
Sounds right?
thanks -
@barbarossa-cologne said in Duet3 + supervolcano + 24v/12v+MOSFET??:
@dc42
I have a power supply with 24v. So I´ll take the 24v version on out1.
Sounds right?
thanksYes.
